Engineering Technical Design Jobs

162 were found based on your criteria

  • Fixed-Price – Est. Budget: $100.00 Posted
    http://www.aaroncake.net/circuits/inverter.asp?showcomments%3Dall http://jaw.iinet.net.au/projects/solar.html we have used these circuit but we have problem how to put these together. we need help to put together and where to put the part here is what we did https://www.dropbox.com/s/y5b7xuyw3yobsdv/Photo%20Apr%2010%2C%209%2054%2048%20PM.jpg i know its wrong, also its weird when we connect the solar power (without connecting to circuit ...
  • Fixed-Price – Est. Budget: $100.00 Posted
    We need a new revision of an existing PCB design and BOM The modifications are limited to the following items: * connector for the display, instead of soldering * ribbon cable for the display connection with pitch that matches the pad on the display * serial port connection to the controller (TxD, RxD, GND). Must be compatible with http://dk.farnell.com/ftdi/ttl-232r-3v3/cable-usb-to-ttl-level-serial-conv/dp/1329311 * intensity of the display text must be controlled by fixed resistors instead of a trimmer I ...
  • Fixed-Price – Est. Budget: $200.00 Posted
    We need to make a complete 3D model of an enclosure / box used for an electronic device. The box is a standard Rittal box (1546500) with some equipment and PCB mounted inside, and some holes cut in the box for display and connections etc. We have a SolidWorks model of the raw box, and 2D drawings of most of the components inside. So the job should be rapidly completed by a skilled solidWorks user. As output we need drawings for ...
  • Fixed-Price – Est. Budget: $50.00 Posted
    Rough App wireframe has been compelited, we are looking somone with expeerince to finiza the UX using balsamic and enhance the user experince for the application. App is roughly 20 pages. Task: App Wire frame needs to be reviewed 1) Review wire frame 2) Confirm App logic 3 Edit/finalize the UX
  • Fixed-Price – Est. Budget: $5.00 Posted
    Draft surveying plans. This is pretty straight forward cad drafting, IMPORTANT we need to have these plans returned within 24 hours. Job: Take a dwg export of a civilcad file, Decide on a suitable scale for an A3 plan Match line type, hatch type, and text font types, to our requirements Move annotation off line work so it is readable. complete a checklist, I have attached a civil cad export, similar to what you would receive in dwg format, and ...
  • Fixed-Price – Est. Budget: $100.00 Posted
    Wireless Monitoring and Control System The wireless monitoring system enables a set of on/off switches to be monitored at a remote site via a wireless radio link and will replicate the state of the transmitter input switches on the receiver outputs. The remote switches could a float switch in a water tank, a door open switch on a door or gate, a motion sensor output, or a flow switch in a pipeline. Transmission range should be at least 500 ...
  • Fixed-Price – Est. Budget: $60.00 Posted
    I want to enhance an image which has been corrupted with speckle noise by using a dictionary technique, the input image should be of size 256x256 or 512x512. the output image should be distinct from the input image that is to say the output should be the enhanced version of the input image. Again the input image should be an image which has been corrupted with speckle or an image that we can add speckle noise to it in different ...
  • Fixed-Price – Est. Budget: $50.00 Posted
    I need help designing a circuit that will use a microprocessor and sensors to measure the angle of the surface that the circuit is sitting on. The angle will need to be displayed on an LCD screen after it is measured. Somethings I am concerned with: - I want a small footprint for the circuit design - I will be mass producing this circuit, so keeping costs down is very important - The circuit will need to have some kind of on/off ...
  • Fixed-Price – Est. Budget: $100.00 Posted
    This piece of work should include 1 construction project procurement; traditional and current practice 2 the RIBA plan of Work 2013 3 team working, roles and responsibilities 4 specification preliminaries 5 construction contract administration 6 alternatives to JCT contracts. IT is straight forward as most of it is just explaining what they are, giving examples and adding diagrams. PLEASE SEE ATTACHED DOCUMETNS FOR FULL DETAILS AND FOCUS MORE ON SECTIONS WITH HIGHER MARKS. I WILL NEED 1500-2000 WORDS I USUALLY ...
  • Fixed-Price – Est. Budget: $150.00 Posted
    Begin your reply with this quote: "I HAVE BLUEPRINT EXPERIENCE" I need someone who can take a drawing and create blueprints for a residential home, including floor plans and elevation drawings. I have attached our exel file with the specs. I need this in a blueprint format, with all drawings, including elevations, floor plans, and specs. The usual set of home drawings. But it needs to be modified to look like this: http://www.houzz.com/photos/96881/Eco-Retreat-rustic-exterior-los-angeles I ...
loading