Survey Design Jobs

6 were found based on your criteria

  • Hourly – Less than 1 week – Less than 10 hrs/week – Posted
    We need to have a site plan drawn up which will be presented to our local building office for approval. This needs to have an architectural look (please reference http://www.bristolprofessionalpark.com/images/siteplan-lg.jpg as an example) and everything needs to be to scale. We will provide supporting documents for size. This project needs to be completed within 72 hours. We will be looking to hire someone immediately! Please reference the word "state plan" so I know that ...
  • Hourly – 3 to 6 months – 10-30 hrs/week – Posted
    When replying, please submit your best samples, which most resemble the building style designated. Also, please submit your email address, phone and mailing address as well as your SKYPE ID, we will submit a Dropbox link to the candidates as we finalize our selections. This will have to be worked on quickly because we're in a very cold climate and want to get City permits and construct the foundation before the ground freezes! Design Small Oriental/Korean Styled "City ...
  • Fixed-Price – Est. Budget: $50.00 Posted
    Town Planner - With experience dealing with Australian Councils zoning maps, zones, FSR so on We are seeking an experienced person with experience with the following Town Planning - With experience dealing with Australian Councils Able to understand zoning maps, zones, FSR so on Able to understand / research council / government legislation's Able to locate opportunities within the zoning, to find opportunities to subdivide blocks of land, perform developments, split parcels of land, town houses, and locate great residential and commercial opportunities ...
  • Hourly – 3 to 6 months – 10-30 hrs/week – Posted
    Design Small Oriental/Korean Styled "City Cabin" with a broad cupola, on Walkout Lot, With 2 Master BR & Garage Beneath (around 900 square feet +- on main level) with 2 master suites. It is intended to be a Carriage House design. Need to design specific to site, which is a walkout site, featuring a 12% slope, a survey was recently completed, together with topos. It must also be designed according to a specific municipal checklist. Must include, electrical design, plumbing, HVAC, etc. Need to be planned for 2" x 6" wood framed construction and 6 inch ICF walls, so that we may send plans out for bid for either type of construction. Requires cross sections as if building was cut down the middle of a wall to illustrate profile of building for municipality. The broad cupola will feature operational windows on all sides, with a decorated (on the exterior, for aesthetics), reversible barn fan, facing the North side (to aid with whole house ventilation), it must be wired for switching from a convenient location on the wall below. The lot has a major street on the north side, with an undeveloped street that's used as more of an alley/parking lot on the south side, and a 12 foot alley seperating it from the lot on the east side. The focal point of the house must be on the south west side, with an orientation of the front, toward the north. The top portion will contain the 2 bedrooms with 2 full baths, 1/2 bath, pantry, laundry, study room, and have an open, eat-in kitchen, combined with modest sized living room. The lower area, will have a 2.5 car garage, with the bay doors facing south. Behind the garage bay, there must be a seperate area for a utility room and a guest bedroom with full bathroom. This room will serve 2 other purposes: entertainment and tornado storm shelter. Must include electrical design as well as plumbing. We intend to use Pex tubing with copper fittings for the plumbing. Must also include HVAC design. We intend to use either, electric baseboard heat; electric or gas boiler heat (like a Munchkin unit, for instance) along with a mini-split air to air heat exchanger for heating/cooling (too cold in Minnesota to use without supplementary heating system); we'll supplement with a wood burning stove (we have abundant firewood), an inexpensive alternative. Since only the range hood and gas dryer will employ ventilation to the outside ...
  • Fixed-Price – Est. Budget: $100.00 Posted
    I need a well experienced, and skilled architect to convert a cad drawing of a house into a 3d model. Attached are level 01 and level 02 and part completed elevations also the survey drawing showing the plot boundaries. Following work will need to be done: 1. Use the cad drawings to build the walls and placement of the windows (windows are not yet designed completely but you should get an idea of the sizes from the elevation attached) 2 ...
loading