Arduino Jobs

14 were found based on your criteria

  • Fixed-Price – Est. Budget: $50.00 Posted
    Sketches to read the sensors attached to the SODAQ board, log this data to memory and upload it on a half hourly schedule over GPRS via FTP. Board is solar powered and should wake up every minute, read and log sensors, then sleep. FTP data every 30 minutes (the ability to change this in the code would be useful). Needs to work on the SODAQ Moja Arduino board with GPRSbee. Sensors are: Adafruit BMP180 - Barometer Grove Pro Temperature/Humidity sensor ...
  • Fixed-Price – Est. Budget: $20.00 Posted
    hello, i need some help connecting 2 Encoder Motors with drivers to be controlled by arduino.. here is the hardware i have: 2x GB37Y3530 http://www.dfrobot.com/index.php?route=product/product&product_id=633#.U75q6Y1dU0_ http://www.dfrobot.com/image/data/FIT0185/64CPR-encoder.jpg 2x L298N http://www.amazon.com/Bridge-Stepper-Driver-Controller-Module/dp/B008KYCDTY 1 X Arduino Uno SMD R2 your Task is to help me connect the 2 encoder motors to the drivers and then connect both using the ...
  • Fixed-Price – Est. Budget: $100.00 Posted
    I have a Arduino Mega2560 board connected to a 16x2 LCD screen. I also have a lithium battery connected to my Arduino by I2C 2-wire I would like to display battery capacitance I have datasheets for battery, it uses a Texas Instruments BQ3050 fuel gauge I also have Arduino sketches for similar projects and videos with wiring diagrams If this can be achieved, I have lots of other project with Arduino Sketches
  • Hourly – 1 to 3 months – 10-30 hrs/week – Posted
    I am looking for help to produce few, simple connected items to my IOT platform. You will be using Arduino and X-Bee parts and sketches. The first three projects will be 1. A wireless heart rate monitor and 2. Xbee location sensors emitters and receivers 3. Tension sensor You will create and miniaturize prototype and work with our developers to integrate in to network and visualize output. You will be paid per project and you will be residing in the ...
  • Fixed-Price – Est. Budget: $100.00 Posted
    Need to have code written for Arduino UNO with Arduino (Itead 1.1) GPS Shield and Arduino (Telefonica) GSM shield. Goal will to eventually be used to track livestock. I'd like to have real time tracking with google maps interface. Like this; http://www.instructables.com/id/Real-Time-GPS-Tracker-with-Integrated-Google-Maps/step1/null/ but with the components listed
  • Hourly – Less than 1 month – Less than 10 hrs/week – Posted
    We need to build a machine for feeding ingredients into bags. There are 9 augers controlled with stepper motors The user selects a setting and the steppers spin the augers at different speeds to feed different amount of the ingredients. The user can create and edit up to 20 different settings. The machine uses a 4.2" LCD, an Arduino and stepper drivers. What is needed: create program for Arduino or Raspberry create a user interface for the LCD
  • Fixed-Price – Est. Budget: $40.00 Posted
    Hi, My name is Sean Carson and I'm writing about a small project I have that might be of interest to someone with experience of Arduino. I've got a small project I'm working on that I'm sure to someone experienced won't take very long to figure out at all. I'm building myself some sequential LED shift lights for my car that rise and illuminate as the engine's RPM increases - it's a race ...
  • Hourly – Less than 1 month – 30+ hrs/week – Posted
    I need a remote monitoring / control system designed to data log, set parameters from mobile device, and control outputs. 6 Sensors will be 4-20ma as well as 0-10V. 6 Outputs will be relay controlled. System needs to have user interface or tied into an existing App (IOS) and webpage integration. Remote function could use ethernet, wifi, or gsm sheilds. Systems need to be secure with protected password.
  • Hourly – Less than 1 week – Less than 10 hrs/week – Posted
    The job is about setting up a system of different sensors which will be sent into stratosphere via a Wheather Balloon. I would need a programmer/Arduino expert to help me set up a system of different sensors. Most of the functions i need already exist in scripts available on the internet and i just need a person who puts them all together and makes shure they work correctly.Also the person should give some advise when buying the different ...
  • Hourly – Less than 1 week – Less than 10 hrs/week – Posted
    This is the start of a larger project. First part is to Design and build an Arduino board to control a solenoid from a csv file and a RFID. The RFID will read and then the corresponding number in the CSV will tell the solenoid to open or close.
loading