Arduino Jobs

30 were found based on your criteria

  • Fixed-Price – Est. Budget: $300.00 Posted
    We want you to build a small, portable hardware device that can connect via ethernet cable to other devices, receive files via FTP, and then send transformed versions of these files out (across WiFi network and/or 4G) to a remotely running web server. The software running on the device should also continuously ask the remotely running web server if that server would like a copy of the file transformed in a different manner. (3 additional transformation types shall be ...
  • Fixed-Price – Est. Budget: $1,000.00 Posted
    We have Raspberry Pi 2 / Model B+ Our goal is lunching HTML5 1080p video smoothly and without any frozen. We tried many way but we could not be successful. Here is the exact link of our video notice: you can use any browser you want.. You can also use any operating system you want.. - must be run on raspberry boot without GUI - must support fullscreen mode we are looking for solution!.. (do not tell ...
  • Hourly – Less than 1 week – Less than 10 hrs/week – Posted
    I have a Little Project for my home. My 8x39 LED-Matrix with ws2812 strips should be controlled per arduino uno. The Arduino will be controlled per HC-05 Bluetooth-modul and a Android App. I have everything ready i just can´t Combine the sketch for my arduino. I want to write a text in my App and then i want to have it as a Scrolling text on my LED-Matrix. The App i would want to use is "Ardudroid". As Attachment ...
  • Fixed-Price – Est. Budget: $75.00 Posted
    I need a programmer that can create a simple Arduino code for me. The code that I need requires a simple user interface for monitor that will let user enter a password, after which a lock mechanism will be deactivated for 10 seconds, also a laser tripwire sensor that will instantly lock same mechanism if tripped for at least 20 seconds, and will require a password again to deactivate. This can be done on Arduino or Raspberry Pi, and I ...
  • Hourly – Less than 1 month – Less than 10 hrs/week – Posted
    I need a wifi device to post data to a website. Several Hurdles: 1. I need a wifi device to put out an adhoc network. Once a user connects the should be able to reprogram it to log into a local wifi network. 2. Sensor polled and date, time, mac address, sensor data, and possibly other data sent to a website.
  • Fixed-Price – Est. Budget: $100.00 Posted
    MCU Communications setup: *1 Arduino Uno "MASTER" *1 wireless module nRF24L01+ "MASTER" (UNO) * Multi IMU's Sensors Via I2C or SPI Your Task is to collect IMU Values of its Gyro / Accel and Tx that DATA to its corresponding Rx on the MCU Slave side Specific IMU will only correspond to specific mcu slave nodes while other specific axis from either Gyro or Accel will also correspond to specific slave mcu
  • Hourly – Less than 1 month – 10-30 hrs/week – Posted
    The goal is to have one Arduino stream a signal value to another Arduino using NFC. There are examples of P2P NFC communication, but they are all meant for streaming from an Arduino to device like an Andriod. We need to have NFC between two Arduinos instead. We attempted this briefly and couldn't make it work. The manufacturer of the shield, SeedStudio, said that it would be possible but would require some changes to their C++ library. The shield ...