Arduino Jobs

8 were found based on your criteria

  • Hourly – 1 to 3 months – 10-30 hrs/week – Posted
    Looking to hire an electrical engineer to assist in designing 2-3 PCB board designs for a confidential project. Experience working with the Arduino platform (Atmega 168/328), (long distance) I2C, Ethernet and LCD touchscreen displays is a requirement. Experience using the ShiftBrite platform is a bonus. The incumbent will need to take a concept design, discuss with me the proposed solution and research and propose possible improvements including produce the required PCB/CAD designs. Programming the microcontroller is NOT required ...
  • Hourly – More than 6 months – Less than 10 hrs/week – Posted
    I need someone to write a sketch for my RedBoard by Sparkfun Programmed with Arduino Now I am using sketch to control a servo with one push button. when I press the button once the servo turns 160 degrees (or whatever number of degrees I put in sketch). When I push it again, the servo swings back to 0 deg. See the sketch in this attached file name push-button-servo.txt In addition to above actions I'd like the sketch ...
  • Fixed-Price – Est. Budget: $10.00 Posted
    Need an article about any Arduino sensors. Please list the sensors you know. Article must include an introduction to the piece of hardware that the article is about. Wiring instructions with illustration (with diagram or picture). And should have some code pieces and explanation of the code to make the sensor work. Article should be 400 words or more.
  • Hourly – Less than 1 week – Less than 10 hrs/week – Posted
    I need Arduino code that will read the value of a potentiometer and when the value changes it sends to a web server via a PUT or POST. I'm using an UNO 3 board and Ethernet Shield. Arduino Code Reference: http://arduino.cc/en/Reference/HomePage The finished product will be used as a network enabled volume slider for a home theater receiver that can be controlled via its onboard web server.
  • Hourly – Less than 1 month – 30+ hrs/week – Posted
    I have (in process of finalizing the wiring) a large home automation system with many sensors and relays to control a wide range of pumps, motors, lights, air conditioners, etc. Hardware wise I have multiple Rpi's (would like them to talk), Pi-Rack, Pi-Face (multiple), GERTBoard, Arduino Uno (multiple), Sainsmart digital relays (2,4,8,16 relay boards as well as a couple solid state ones). There should be a 2-3 Rpi working as 1 master and 2 slaves so ...
  • Hourly – Less than 1 month – Less than 10 hrs/week – Posted
    I am an organic farmer in Utah (USA). I am in the process of constructing a building used to grow oyster mushrooms. This type of building requires a lot of environmental controls (i.e.: humidity, temperature, and fresh air exchanges, etc.). I am in need of a programer with experience with electronics AND using the Arduino platform. This person must be able to write the needed code and guide me in the process of building the electrical components of an ...
  • Fixed-Price – Est. Budget: $600.00 Posted
    Build a minimum functional prototype that monitors posture and breathing. The freelancer will need to use an Arduino and design a belt to fix it. The key factor is to be able to collect and interpret datas.We will interact based on my knowledge in Operational Research and Health Care. A su
loading