Microcontroller Programming Jobs

25 were found based on your criteria

  • Hourly – Less than 1 month – Less than 10 hrs/week – Posted
    • Familiar with programming Arm processors. • Be able to programme nRF 51822 chip to read from analogue pins, as well as TWI and the on board Bluetooth. • Reading the sensors so the data could be processed by a higher level programme on the chip.
  • Hourly – Less than 1 week – Less than 10 hrs/week – Posted
    The job is quite easy: we need a micro controller that saves the data to an SD card or USB drive. So we have a device that gives several outputs, first it needs to be found which outputs we need to use and than these outputs need to be saved in a table format. Out final outcome will look like this: Parameter 1 Parameter 2 Parameter 3 8:30:01AM 230V 1A 43 HZ 8:30:02AM 228V 1.2A ...
  • Hourly – 1 to 3 months – 10-30 hrs/week – Posted
    Firmware Development for USB PC Peripheral Seeking an experienced detail oriented electronics engineer to develop and provide a functional firmware prototype for a USB PC peripheral. Prior to project disclosure, a non-disclosure agreement (NDA) must be signed. I prefer a local U.S contractor but willing to work with internationals. Please provide references and original work samples performed. The ideal candidate will take the existing Altium design files and develop the firmware for a working prototype. The candidate will be ...
  • Hourly – Less than 1 month – Less than 10 hrs/week – Posted
    Hello, We developed a motion controller based on Altera Cyclone 2 FPGA CPU. We are looking for a developer who can write parts of the CPU of the controller. The CPU code is written in ANSI C for embedded systems and the IDE is NIOS II. The controller is motion controller. The controller includes digital and analog I/O, encoder readings (incremental, SSI, BISS, Analog Volt) and Hall sensors, communication protocols like RS232, CAN, SPI. Currently we want to implement ...
  • Hourly – More than 6 months – Less than 10 hrs/week – Posted
    Innovative consumer electronics company is looking for an embedded firmware engineer. Wireless experience a must. Responsibilities include: developing code for new handheld wireless-enabled products; maintaining legacy code base for existing products; writing test/debug firmware for production tests & EMC certification; interfacing with third-party hardware and tools; supporting team of hardware engineers from concept through production and beyond. Requirements: * Strong experience with bare-metal ARM embedded systems * Strong C/C++ development and debugging skills * 802.15.4 experience * Linux Pluses: * OpenOCD * STM32 hardware implementation ...
  • Hourly – Less than 1 month – 30+ hrs/week – Posted
    Hello, i have a project which includes Arduino * 2 - 3 analogue sensors * 1 - 2 digital sensors * GSP/GPRS SHIELD * RFID Shiled * OLED or TFT display send data so ftp, so it can be parsed on a website also device must be able to communicate via SMS for controling sensors , stzatus , states etc ... I need a person who can advice which hardware components to use and write a program for this project with all those componets which work with certain logic ...
  • Hourly – Less than 1 week – 30+ hrs/week – Posted
    Seeking an EE to be able to develop a concept for a new product in two stages, these being: Proof of Concept development - The product will require the design of a small circuit board using commercial and readily available components to implement the functionality. Design of the low voltage (battery cell powered) circuit along with a construction of a simple breadboard will be required to display the functionality.It is anticipated this will need experience in analogue and digital (simple ...
  • Hourly – Less than 1 month – Less than 10 hrs/week – Posted
    I am in the process of replacing a UDP micro and developing a TCP micro-controller that has up to 8 (could be up to 72 but will start at 8) inputs/outputs using the IEEE dry contact limits for low voltage AC and DC. The selection of output/input occurs after a log in via TCP/IP. The micro port could be mixed mode input/output No wifi or bluetooth needed. The login username password is checked to an existing ...
  • Hourly – Less than 1 month – 30+ hrs/week – Posted
    Greetings, We are a startup company looking for an embedded software developer that can work with us in a small project of 1 to 2 week maximum duration. We are looking for a developer with a strong background in: * C++ for embedded systems * mbed platform * ARM Cortex-M, specifically Nordic's nRF51822 SoC (and already has a development board for this chip) Having the following skills, though not a requirement, would be a plus: * Smartphone app development * Using Linux as a ...
loading