Hello! I am doing an addition project at my house and before I can pour my footings, I need a compaction report for the building department. Thank you!

I need stamped engineered plans that will be accepted by Waterford, CT. Building Department for a permit. The project is a 50’ retaining wall being built with keystone regal stone pro block and regal stone pro cap. The wall will come off the foundation of the house and run 10’x 10’ out and then 40’ along a hill gradually decreasing in height from 10’ at the corner and highest point of the wall down to 2’ at the 40’ mark. Backfill will be installed to accomplish a level grade in front of the house. Included is a drawing of the job and specs for the keystone regal stone pro wall and cap.

15 minute consultation on how to figure out the foundation of a ranch home. Built in 1979 in Bollingbrook, IL

Deck addition: Wood construction Concrete footings 2x8 deck joists 4x10 beams 6x6 columns Lateral bracing Metal corrugated roofing We will provide a 3D model and details to describe all of the connections. We will need a set of calculations only, to ensure that we have sized and designed everything appropriately.

Texas Licensed PE CAD file and Survey Available 120 apartments Site Plan design Grading design Drainage and Stormwater design Landscape design Soil Erosion Control Design Striping and Signage design Geotechnical East of Dallas Texas

We are seeking to on-board for structural concrete drafting in AutoCAD. Specifically for industrial environments requiring exceptional detail and quality. This opportunity requires full time commitment and interfacing on our behalf. Must have verifiable previous experience and be willing to follow our schedule and chain of command. If you think you would be interested in partnering with an agency that can assist you with growing your backlog, consider reaching out to learn more about the opportunity.

I have a set of architectural plans that I need structural plans drawn up and wet stamped. I have CAD files for the architectural, soil boring report, and TOPO survey.

We are replacing two existing standard size sliding doors with larger accordion style doors on the second story of our residential home in San Diego, CA. One door is in the front of the home and the other is in the rear, and both open up to outdoor patio spaces. We have had an architect draft site, elevation and demo plans which we can share. We also have the specs for the doors to share below. The architect has drafted two options, one for a larger door and one for a smaller door. We are not sure if the larger door will fit and need an opinion on that as part of this process before we start the structural plans. We had the same work done to replace standard size sliding doors with large accordion doors on the lower level of our home three years ago, so I can share the structural engineering plans for that as an example. We are looking for someone who is able to advise on residential structures in the state of California. Door specs: https://www.homedepot.com/p/TEZA-DOORS-Teza-60-Series-120-in-x-80-in-Matte-Black-Left-to-Right-Non-Thermal-Break-Folding-Aluminum-Bi-Fold-Patio-Door-BF12080LTRS60/328026603 https://www.homedepot.com/p/TEZA-DOORS-Teza-85-Series-144-in-x-80-in-Matte-Black-Right-to-Left-Folding-Aluminum-Bi-Fold-Patio-Door-BF14480RTLS85/327234062 https://www.homedepot.com/p/ERIS-Eris-144-in-x-96-in-Black-Right-Opening-Outswing-Aluminum-Folding-Patio-Door-BFO-14496-1R3L/324911174

Need an engineer licensed in the state of califronia who can stamp the attached plans, provide structural calculations and help address any future structural plan check comments.

We are looking for a Professional Engineer (PE) who specializes in concrete stamping to work on our concrete staircase project. The staircase is already constructed, and we need an expert to apply a stamped pattern to enhance its aesthetic appeal. This project requires precision and attention to detail, as the stamped design must align perfectly with the steps. The ideal candidate should have experience in concrete stamping techniques and should be familiar with different patterns and textures. Additionally, the PE must ensure that the stamped design meets all safety and code requirements. If you have the skills and expertise to transform our concrete staircase into a visually stunning feature, we would love to hear from you.