Hello, I'm a firmware/embedded developer and consultant with over 6 years of professional experience. I was involved in firmware development and low level programming for x86, ARM and other architectures. I'm looking for challenging projects in area of embedded systems, general purpose low level programming and reverse engineering. Areas of expertise: * Expert in BIOS/UEFI/EDK2/Tianocore framework * BSP development and integration (Buildroot, Crosstool-NG, U-Boot, Linux kernel, custom toolchains, GCC, GDB) * Internet of Things (IoT) consulting, design, development and integration, wire/wireless communication, protocols * PCB/breadboard prototyping Hands on experience: * CPU/MCU/SoC/PCH: * Intel microarchitecture: Sandy Bridge, Ivy Bridge, Haswell, Broadwell, Skylake * Intel PCH: Ibex Peak, Lynx Point, Sunrise Point, Patsburg, Wellsburg * BCM2835 (Raspberry Pi) * Allwinner A20 (Cubietruck) * ATmega328 (Arduino Duemilanove) * TI CC3100/CC3200 (LaunchPad) * TI CC2541 (SensorTag) * TI MSP430 (LaunchPad) * Amlogic S805 (Odroid C1) * Samsung Exynos 5 Octa (Odroid XU3) * NXP LPC13xx * Nordic NRF24L01 * Nordic NRF51822 * Espresify ESP8266 * Operating Systems development: * Linux * Android * FreeRTOS * TI-RTOS * Debugging: ACPI, PCI, USB, Storage (SATA, SAS, MMC/SD) * System emulation and simulation (Simics, QEMU, Virtualbox) * Embedded systems test automation
Embedded Systems Job Cost Overview
Typical total cost of oDesk Embedded Systems projects based on completed and fixed-price jobs.
oDesk Embedded Systems Jobs Completed Quarterly
On average, 28 Embedded Systems projects are completed every quarter on oDesk.
Time to Complete oDesk Embedded Systems Jobs
Time needed to complete a Embedded Systems project on oDesk.
Average Embedded Systems Freelancer Feedback Score
Embedded Systems oDesk freelancers typically receive a client rating of 4.56.
Hi! I am professional electronics design engineer from the Latvia/EU with more than 10 years experience in the equipment design and manufacturing field. During my practices i have been implemented number of project in the fields of LED lightning, HVAC control, hearing protection and medical. Please, feel free to contact my anytime. BR, Jurijs
Over the last 5 year, I have developed a wide range of embedded system, control systems and linux based applications. - I am familiar with - Embedded targets, such as PIC32, AMR7/9/11 based chip-sets including TI OMAP, Davinci, Sitara, Freescale i.MX. - I have worked on Audio, Video, SD card, i2c drives for embedded targets. - I can help you develop - Device driver (including Linux Device Driver) - Application - Boot-up & configuration scripts for embedded system - GUI application.
«The impossible is a word that does not exist in my vocabulary…» I am programming in various programming languages since I was 14 years old. Today, I am an Enterprise Architect with a long experience and deep knowledge in the field of computer science and engineering. What distinguishes me, among the others, is the fact that I have a deep understanding in operating systems and programming languages. My point of view is that hard work and creativity in conjunction with knowledge is always more efficient than cleverness. I can adapt very quickly in new environments and I have a strong analytical and organizational background which helps me solve difficult problems effectively. I believe that nothing is “impossible”. All it takes is to be diverse in order to be able to find other methods for solving a problem. I love my work because I like challenges. Software development has always been a challenge for me because in order to find more efficient and innovative ways to optimize the final results I had to hack deep inside to the core of each application. Finally, I am an active member of the Open Source Community with three major projects and I have helped in the past with the Linux Kernel development.
During the last 4 years, I have worked as C/C++ developer of application software (simulation systems), kernel mode Windows/Linux drivers, and real-time applications for x86/MCS51/ARM-based devices. Also I have skills in GPS(GNSS)/GLONASS and inertial navigation systems. Good knowledge in network programming (have own simple implementation of TCP/IP stack).
I am a Cleantech Entrepreneur with a Mechatronics B.Sc. 4 years of experience in Business and Technology development and Entrepreneurship. I am also a part time Programming teacher in one of the best High Schools in the country.
Hi, I’m Mohammad Mahbub-ul Alam. I am working as a senior embedded system knowledge migrant in the Netherlands. I am here to establish a career as a FREELANCE SOCIAL SOFTWARE WORKER. From my oDesk earning, I will spend 50% on BETTER TREATMENT FOR PRIVILEGED CHILDREN in my neighborhood in Bangladesh, 35% will be spent on EDUCATION project run by Dharmorajik Buddhist Temple and the remaining will go for social welfare fund for ELDERLY people. I will share every information in detail with my clients as a part of the agreement about the above mentioned projects. PLEASING CLIENT is the only way to earn reputation and trust in any sector of business development. I am a reliable service provider with fine tuned quality in less time at reasonable prices. I am looking for regular part time work that will enable me to use the many skills that I have gained over the years. I am proficient in a variety of computer software programs as well as in data entry. Though this is totally a leisure work but I am confident to provide support to almost all administrative tasks like requirement analysis, plan, development, investigate risks etc. I am able to work both on a team as well as independently. I have a professional, yet informal and friendly, demeanor and I am a reliable, dedicated , and extremely hard-working employee. I wish to work for clients in a long term basis.
I have been in the computer industry professionally since 1984. I have seen MANY changes. I have had just about every position in an IT department and loved each one. I am great at analyzing business requirements and translating them into cost-effective solutions. Mobile Apps, Cloud Computing, e- and m-commerce websites are where I am focusing my attentions primarily. I will gather the requirements and project manage a team of developers from the pool of 1200 off-shore developers I have. Average cost per hour will be $35 for an off-shore developer. Fixed fee projects are also possible. I enjoy group projects as well -- find me 5 companies in the same industry and we will develop a more robust solution at a fraction of the cost! If you need me to come in and assess your business and IT department on a short-term consulting basis, I am happy to do that as well. I look forward to helping you...
Over the past 20 years I have developed a wide range of multi-disciplinary IT solutions incorporating both hard- and software domains ranging from full Medical Practice Management Software suites, to various office automation suites, to fully fledged Home Automation and Security hardware systems design and implementation. Over the past 8 years I have focussed on bespoke electronic systems using various microprocessors to integrate real world sensors into software management systems. My core competency lies in the end-to-end management of home automation and security systems focussing on video analytics, access control and surveillance systems. I have experience in the following areas: C, C++, Networking, Firewalls, Linux, embedded systems, ffmpeg, GStremer, PHP, Lua and SQL, Excel Pivot Table design and implementation, PDF document design for office automation.