Embedded Linux Freelancers

Showing 23 freelancers

Embedded Linux Freelancers

Showing 23 freelancers

  • Security embedded engineer

    I have an experience of 11 years including science research skills, strong knowledge of embedded systems, firmware, hardware design, Windows architecture, windows video subsystem and modern hardware (such as GART, PCIe, hypertransport, etc). More that 6 years experience with distributed … more

    I have an experience of 11 years including science research skills, strong knowledge of embedded systems, firmware, hardware design, Windows architecture, windows video subsystem and modern hardware (such as GART, PCIe, hypertransport, etc). More that 6 years experience with distributed teams and big companies (FOCON, Siemence). University Master's degree. My main skills are: - Assembler, C/C++; - Linux kernel drivers; - eCos kernel drivers; - cryptography (PKCS #11, DSA, Block cyphers); - Smart card security; - USB device/OTG, USART, SPI, I2C; - JavaCard; - Embedded Ethernet; http://www.linkedin.com/pub/victor-tatischev/38/941/379  less

    c++ x86-assembler embedded-linux windows-app-development embedded-systems 00 more less
    • $16.67 HOURLY RATE
    • 4.1
    • 0 HOURS
    • RUSSIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 0 TESTS
  • Programmer / Graphic Designer

    Over the last 5 years, I have developed programs written in C, C++, C#(for mobile programming on a windows mobile phone), Embedded C(using the Arduino Development board), Embedded Linux(Using the KZM-ARM 11 board). I am also inclined … more

    Over the last 5 years, I have developed programs written in C, C++, C#(for mobile programming on a windows mobile phone), Embedded C(using the Arduino Development board), Embedded Linux(Using the KZM-ARM 11 board). I am also inclined not only in programming but also in digital graphics design using Adobe Photoshop. Doing posters, banners, logos, certificate designs, and the like has been my passion for almost 4 years now. It is where I channel my creative ideas and put them into reality. I have worked for a Japanese company as an Andoid Developer. The project which I am assigned was the Augmented Reality on Android. Unity 3D was used for this application. I also developed a native application for android, an IP camera viewer.  less

    c embedded-linux 00 more less
    • $11.11 HOURLY RATE
    • 5.0
    • 0 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 18 PORTFOLIO ITEMS
    • 9 TESTS
  • SENIOR SOFTWARE ENGINEER

    - M.S.C. Senior Software Engineer with more than 10 years of experience working with multinational companies inside complex projects. - C, C++, Java, Visual Basic and VBA experienced programmer. - Matlab experienced developer. - Eclipse, Doors, Irqa advanced user. - Software Control Systems … more

    - M.S.C. Senior Software Engineer with more than 10 years of experience working with multinational companies inside complex projects. - C, C++, Java, Visual Basic and VBA experienced programmer. - Matlab experienced developer. - Eclipse, Doors, Irqa advanced user. - Software Control Systems knowledge: SCCS, SVN, CSV, GIT and Mercurial. - Beauty coding and full comented according to own coding standard but open to adapt it to your company ones. - Experience in embedded software for real time and critic systems under strict coding standards: MISRA, DO178, ... ------------------------------------------------------------------------------------------- - SW Responsible of unmanned aerial system projects (UAV). - Establishing clear objectives and priorities to the dependents and implementation of control and monitoring of their tasks. - Detection of product deficiencies and proposing ways of solving them. - Risk identification and anticipation of deviations. - Customer orientation. - Analysis, review and design of system requirements. - Documentation design according to DO-178B standard. - Test development and implementation of SW testing. - Participation in the integration, verification and validation of the design and operation of the components or parts of the system checking that meets the technical requirements and quality standards.  less

    c c++ ada microsoft-visual-basic embedded-c java vba cvs svn git software-testing embedded-systems embedded-linux github matlab 00 more less
    • $61.11 HOURLY RATE
    • 5.0
    • 257 HOURS
    • SPAIN
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 4 TESTS
  • iPhone/iPad, Android, PHP, Embedded Development

    With a portfolio of more than 70 Apps & games till date, Agicent is a rapidly growing specialized third party Mobile and Web app developer. We extensively work across iPhone, iPad, Android, HTML5; and besides that we also work on Embedded … more

    With a portfolio of more than 70 Apps & games till date, Agicent is a rapidly growing specialized third party Mobile and Web app developer. We extensively work across iPhone, iPad, Android, HTML5; and besides that we also work on Embedded Software/ hardware. Hire us for the best quality software development and consulting.  less

    iphone-app-development ios-development android-app-development html5 objective-c embedded-c embedded-linux mobile-app-development jquery jquery-mobile game-development ipad-app-development blackberry-app-development iphone-ui-design php .net-framework 00 more less
    • $17.78 HOURLY RATE
    • 5.0
    • 0 HOURS
    • INDIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 2 TESTS
    ASSOCIATED WITH:
  • Design engineer

    I am a Software and Hardware design engineer. I make electronic devices from idea to real prototype. I working in Altium designer, also I have skills in using Mentor Graphics. I can perform complicated projects, that include prepare schematiс for … more

    I am a Software and Hardware design engineer. I make electronic devices from idea to real prototype. I working in Altium designer, also I have skills in using Mentor Graphics. I can perform complicated projects, that include prepare schematiс for ddr2 and high speed components and pcb routing. Also I specialize in design software for embedded devices. For some projects I use U-boot+GNU/Linux, and some times I write software for bare systems. I new different cores and microprocessors.  less

    socket-programming systems-development pcb-design data-entry embedded-linux c embedded-systems 00 more less
    • $16.67 HOURLY RATE
    • 5.0
    • 38 HOURS
    • RUSSIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 6 TESTS
  • Senior Embedded System Engineer

    ver the last 4 years, I have involved in Design (HW and SW) of RF Transceiver based on (Texas 6416DSP), Software Defined Radio (SDR) based on Texas 6416DSP), Ciphering telephone system based ARM,contactless card application,Tracking System using GPS … more

    ver the last 4 years, I have involved in Design (HW and SW) of RF Transceiver based on (Texas 6416DSP), Software Defined Radio (SDR) based on Texas 6416DSP), Ciphering telephone system based ARM,contactless card application,Tracking System using GPS/GSM and Traffic channel central office. I also have good experience in the following areas: Strong knowledge of C / C++, C# and SQL Server2008. Strong knowledge of (RTOS) concepts and Familiar with digital (wireless) communications and MATLAB. Ability to work with DSP Kit (TMS320C6416 DSK Taxes instruments) and ARM Kit. Familiar with lab equipment like Oscilloscope, Function Generator, Spectrum Analyzer and RF Generator. Familiar with a wide variety of Microcontrollers brands and families, with capability to use its modules (PWM, UART, I/O’S, SPI, I2C, etc...). Why is this good? Cipher telephone System Production for military organization This project has many modules like (GLCD, V34 modem, external RAM, external Flash, smart card reader, etc.). It’s based on ARM and with operating system (embOS); 2011 sales volume: $1M. Pre-paid meter charge center This project is desktop application to implement the electricity Pre-paid meter clients Database using SQL with GUI interface using C#. Tracking System using GPS/GSM This project is prototype of tracking system based on PIC and GPS/GSM for cars. RF transceiver Production for military organization Being part of a team programming RF communication device (Analog "FM" and digital "MFSK"), on Texas instruments DSP TMS320C6416 and develop drivers for analog device chip (synthesizer and received signal processor ’RSP’) and using XILINX CPDLD XC9500 as driver for user interface and implement a simple UART on it. Software Defined Radio (SDR) Production for military organization A rich HW that provides the install of different Modulation/Demodulation SW, encryption algorithms and data compression algorithms based on (Texas 6416DSP). I was involved into the embedded SW (design, development and testing) for this project. Reading, charity work and play squash. Enjoying learning new techniques related to the Embedded System Design field. Skills Innovative. Leadership Working under pressure. Problems solver. Flexibility and self learning. self-confidence take responsibility Seeking a good job opportunity as a designer and developer for embedded systems (automotive, communication, military software and hardware). That will utilize my experience and improve my career Experience in that field. Implementing my educational knowledge to add a value for that organization through hard work and team building.  less

    mysql c embedded-c embedded-systems embedded-linux 00 more less
    • $11.11 HOURLY RATE
    • 5.0
    • 13 HOURS
    • EGYPT
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • Embedded Consultant

    Over the last 5 year, I have developed a wide range of embedded system, control systems and linux based applications. - I am familiar with - Embedded targets, such as PIC32, AMR7/9/11 based chip-sets including TI OMAP, Davinci, Sitara, Freescale … more

    Over the last 5 year, I have developed a wide range of embedded system, control systems and linux based applications. - I am familiar with - Embedded targets, such as PIC32, AMR7/9/11 based chip-sets including TI OMAP, Davinci, Sitara, Freescale i.MX. - I have worked on Audio, Video, SD card, i2c drives for embedded targets. - I can help you develop - Device driver (including Linux Device Driver) - Application - Boot-up & configuration scripts for embedded system - GUI application.  less

    embedded-linux assembly-language x86-assembler electronics embedded-c embedded-systems 00 more less
    • $33.33 HOURLY RATE
    • 4.7
    • 91 HOURS
    • INDIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • Linux kernel / DSP / Networking professional

    I have more than 12 years of experience working for software companies and as a freelance contractor. Had worked more than 4 years on vWorker.com until it got acquired by Freelancer.com. For those who're interested - here is … more

    I have more than 12 years of experience working for software companies and as a freelance contractor. Had worked more than 4 years on vWorker.com until it got acquired by Freelancer.com. For those who're interested - here is the profile link to Freelancer.com: http://www.freelancer.com/u/evgeny777.html I like tasks which are difficult and challenging. I've worked with lot of technologies and libraries, but my favorite are: - Linux kernel mode components and drivers - P2P networks and related algorithms (Kademlia, Chord, ...) - Digital signal processing (DSP) algorithms - Audio/Video processing and streaming solutions Favourite implementation languages are C and C++, but I can also code in assembler, C#, Java, Perl and Python. This depends on task to be done. Java  less

    c++ c c# linux-system-administration embedded-linux computer-networking java 00 more less
    • $16.67 HOURLY RATE
    • 5.0
    • 0 HOURS
    • RUSSIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 3 TESTS
loading