Eagle Freelancers

Showing 155 freelancers

Eagle Freelancers

Showing 155 freelancers

Browse Eagle Pcb job posts for project examples or post your job on oDesk for free!

Eagle Pcb Job Cost Overview

Typical total cost of oDesk Eagle Pcb projects based on completed and fixed-price jobs.

oDesk Eagle Pcb Jobs Completed Quarterly

On average, 17 Eagle Pcb projects are completed every quarter on oDesk.

17

Time to Complete oDesk Eagle Pcb Jobs

Time needed to complete a Eagle Pcb project on oDesk.

Average Eagle Pcb Freelancer Feedback Score

Eagle Pcb oDesk freelancers typically receive a client rating of 4.68.

4.68

Last updated: February 1, 2015

  • Analog IC design engineer

    Mainly I am working as Analog IC design engineer using IHP technology from circuit design to GDS-streaming for more than 5 years. For the need of IC designing, I also works with Matlab with Simulink, electromagnetic software named Sonnet. Beside … more

    Mainly I am working as Analog IC design engineer using IHP technology from circuit design to GDS-streaming for more than 5 years. For the need of IC designing, I also works with Matlab with Simulink, electromagnetic software named Sonnet. Beside that I also works with Eagle PCB designing software as we need to build the testing PCB for the ICs. Here, I make custom library for the IC we make and make foot-print of the IC and other discrete component we need in the testing PCB. Beside those, personally skilled with Cadence OrCad and PCB editor.  less

    cadence-platform eagle-pcb matlab electronics 00 more less
    • $16.67 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • GERMANY
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 0 TESTS
  • C/C++/assembler/electronics

    Used to programming in C/C++ language for Linux platform with both GUI (QT, EFL) and non-GUI. Also, I can write bash-scripts. I have about 6 years of experience with x86 assembly for MS-DOS (both with using int 21h call … more

    Used to programming in C/C++ language for Linux platform with both GUI (QT, EFL) and non-GUI. Also, I can write bash-scripts. I have about 6 years of experience with x86 assembly for MS-DOS (both with using int 21h call and without it). For Linux platform I used assembly very little at basic level only. I have about 2 years of experience with AVR MCU assembly. Also, currently I study both analogue and digital electronics.  less

    c qt assembly-language x86-assembler atmel-avr eagle-pcb electronics bash-shell-scripting c++ autocad 00 more less
    • $9.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • RUSSIA
    • LAST ACTIVE
    • 3 PORTFOLIO ITEMS
    • 2 TESTS
  • Microcontroller Programming, PCB Layout, Schematic Entry, Circuit Desi

    Schematic entry and PCB Layout in Eagle which i use for over 10 years now. Generation of a Gerber-Files from the layout, ready to use in PCB production. Programming of PIC microcontrollers, mainly the PIC18 series, in C and assembly … more

    Schematic entry and PCB Layout in Eagle which i use for over 10 years now. Generation of a Gerber-Files from the layout, ready to use in PCB production. Programming of PIC microcontrollers, mainly the PIC18 series, in C and assembly. C compilers used are the open-source SDCC as well as the proprietary MCC18 compiler from Microchip. Using PIC micro's for over 6 years now. Knowledge of ARM based microcontrollers (especially the LPC series from NXP) using tge GCC compiler. Programming of PC based tools to control and communicate with the microcontroller circuits under the Linux operating system. Tools can be console based, or GUI based using the QT-Toolkit. Programming under Linux for about 8 years now. Digital circuit design according to the customers preferences and needs. Designing custom circuitry for about 8 years now.  less

    circuit-design pcb-design eagle-pcb 00 more less
    • $27.78 HOURLY RATE
    • 5.0
    • 232 HOURS
    • GERMANY
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • Advanced level Engineer with knowledge on vast technical fields

    I am an recognized engineer in private sector with an extensive knowledge of electrical and electronic knowledge with basic programming knowledge. I am experienced with AutoCad, Mathlab, PSpice, Visual Studio, Microsoft Access, and many others. As a Qualified Engineer , I … more

    I am an recognized engineer in private sector with an extensive knowledge of electrical and electronic knowledge with basic programming knowledge. I am experienced with AutoCad, Mathlab, PSpice, Visual Studio, Microsoft Access, and many others. As a Qualified Engineer , I have been involved in various projects of IEEE, ESAB, and a few workshops of my current University. Currently I am an Assistant Electrical Engineer of a housing project and with my knowledge and skills I was able to shine my name over there by designing the electrical floor plan via AutoCad. My next look is to get deep into the micro design end of the mos using Dsch software. I love to work for the startup companies especially in EEE and ECS fields. Over the last few years , I have successfully delivered several projects and workshops from that fascination and working on my project and thesis paper. I hope I will be able to enjoy my consultancy work in future.  less

    autodesk adobe-dreamweaver microsoft-visual-c++ microsoft-visual-basic pspice microsoft-excel microsoft-powerpoint microsoft-access eagle-pcb corel-paint-shop-pro report-writing 00 more less
    • $20.00 HOURLY RATE
    • 5.0
    • 337 HOURS
    • GERMANY
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 7 TESTS
  • electronics design engineer

    Electronic schematic and PCB (EAGLE, PCAD) design engineer and programmer. Desktop C++ (QT for GUI) or just ANSI-C programmer, also I know Pascal (Delphi), and have some starting level in Java.

    eagle-pcb p-cad ni-multisim assembly-language ansi-c qt c++ 00 more less
    • $3.33 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 0 TESTS
  • Software and hardware electronic engineer.

    I am an engineer developer. 5+ years work experiences on electronics/hardware design. Here is a list of my skills: Microcontrollers: Atmel ATmega and ATiny series. Microchip PIC18, PIC24, dsPIC30, dsPIC33 series. ARM Cortex STM32. PCB designer: P-CAD, Altium Designer, Eagle. Programming: С, С++, С#.

    microcontroller-design microcontroller-programming pcb-design eagle-pcb altium-desiger p-cad atmel-avr circuit-design 00 more less
    • $13.33 HOURLY RATE
    • 5.0
    • 9 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 17 PORTFOLIO ITEMS
    • 2 TESTS
  • Embedded System Engineer

    5 years experience in area of design and development of embedded systems. The process of designing and development (in which I have been involved) was comprised of designing PCB, software engineering, programming (mainly in C) and testing.

    eagle-pcb c c++ pcb-design matlab 00 more less
    • $20.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 127 HOURS
    • MACEDONIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 0 TESTS
  • Embedded software/firmware engineer and developer

    Software and firmware developer for a lot of MCU and CPU and related compilers and ide: Microchip PIC, TI MSP430, Marvell PXA270, Arduino and others. Programming languages: assembler, C, C++, C# and frameworks. Experience more than 15 years. My goal is to develop reliable, robust and smart software/firmware applications for customer satisfaction

    arduino c c++ microsoft-visual-c++ c# embedded-systems embedded-c assembly-language electronics eagle-pcb 00 more less
    • $18.89 HOURLY RATE
    • 4.7
    • 24 HOURS
    • ITALY
    • LAST ACTIVE
    • 8 PORTFOLIO ITEMS
    • 2 TESTS
  • Embedded Hardware/Firmware expert

    I'm an experienced embedded firmware and hardware developper with 8+ years of experience in the industry. I'm skilled in hardware design, PCB design, product development, firmware programming/debugging, and hardware debugging. I'm experienced in working with ARM … more

    I'm an experienced embedded firmware and hardware developper with 8+ years of experience in the industry. I'm skilled in hardware design, PCB design, product development, firmware programming/debugging, and hardware debugging. I'm experienced in working with ARM Cortex family of devices, PIC, MSP430 and many others. Feel free to contact me for all your embedded/hardware needs.  less

    pcb-design eagle-pcb embedded-c embedded-systems electronics microcontroller-design microcontroller-programming 00 more less
    • $33.33 HOURLY RATE
    • 4.6
    • 110 HOURS
    • MACEDONIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 6 TESTS
loading