Embedded C Freelancers

Showing 22 freelancers

Embedded C Freelancers

Showing 22 freelancers

  • Shahbaz Ali

    I have more than 9 years of experience in Electronics circuit design, micro controller programming,PCB design, circuit simulation. i have done hundreds of micro controller based projects, few of them are: Electronic voting machine, Remote Data logging device, PID controllers, Un manned Railway level crossing. OMR (optical mark reader) etc.

    electronics embedded-c 00 more less
    • $22.22 HOURLY RATE
    • 4.9
    • 5 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 4 PORTFOLIO ITEMS
    • 3 TESTS
  • Electronics Hardware and Firmware

    I have 9 years of exposure to Industrial product design and development environment in electronics hardware, firmware, sensor / actuator interfacing, and embedded systems. I have had mixed profile of hardware and firmware development for power electronics in embedded electronics area … more

    I have 9 years of exposure to Industrial product design and development environment in electronics hardware, firmware, sensor / actuator interfacing, and embedded systems. I have had mixed profile of hardware and firmware development for power electronics in embedded electronics area. I have can do circuit design, schematics and layout. I can work on PCB tools like OrCAD, Protel, Altium, and Eagle. I have designed products involving Arduino, PIC, TI’s DSP, 8051, low power MSP430 controller, etc. Application wise projects I have done Renewable Energies, Power equipment and electrical drives control, low power embedded applications, etc I have had good hands on with SIMUNIK, MATLAB, LabVIEW, and various spice software for circuit and system simulation. Please contact for any query.  less

    embedded-systems pcb-design simulink embedded-c technical-writing electronics matlab 00 more less
    • $12.22 HOURLY RATE
    • 4.2
    • 1 HOURS
    • INDIA
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 5 TESTS
  • Experienced Developer w/ Engineering Degree, Access/VB/Embedded Progra

    For more than 10 years I have developed applications for sale in a private business while working full-time in an engineering position at major corporations. Therefore I am proficient in development on large team projects but also stand-alone small applications … more

    For more than 10 years I have developed applications for sale in a private business while working full-time in an engineering position at major corporations. Therefore I am proficient in development on large team projects but also stand-alone small applications for the web and Windows. I am seeking opportunities to efficiently develop sites or applications for your business.  less

    microsoft-visual-basic embedded-c microsoft-access uml 00 more less
    • $22.22 HOURLY RATE
    • 4.8
    • 2349 HOURS
    • UNITED STATES
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • PMP with 12 years experience in Embedded Solutions Design

    Professional Profile • An astute professional with 12+ years of experience in Embedded Solutions Design, Product Development, Embedded Software Development, Application Development and Project Management • Demonstrated analytical, problem solving and organizational ability coupled with strong communication and relationship management skills • Excellent … more

    Professional Profile • An astute professional with 12+ years of experience in Embedded Solutions Design, Product Development, Embedded Software Development, Application Development and Project Management • Demonstrated analytical, problem solving and organizational ability coupled with strong communication and relationship management skills • Excellent team building and troubleshooting skills with proven abilities in planning and managing resources Areas of Expertise Controllers /Tools ST ARM CORTEX M3 series - STM32F103RBT6, STM32F107VC Nuvoton CORTEX M0 series – LM0516 Texas MSP430 series - MSP430F149 Renesas 38024, 38104, 30281FAHP Keil uVision 4.0, IAR Embedded Workbench V1.26B Hitachi Embedded Workshop V4.0 MSP FET V3.03 Code Composer Essentials Professional Ver. 3.0 Languages / OS Embedded C, Python, Visual Basic 6.0, Assembly Language, Android, Symbian and Brew fundamentals Technologies Machine to Machine (M2M) based product development on GSM, GPRS, CDMA 1x, EVDO. Thermal Printer Driver development, Bluetooth, USB, GPS, Ethernet, Lightweight IP, TCP/IP, MODBUS, RS232, RS485, Barcodes IT Skills MS Projects, Pro E viewer, Subversion, Protel 99SE for EDA, CAM350 Core Competencies Project Management • Focused on Product Development for verticals of Wireless M2M and Thermal Printing. • Handling the complete cycle of project management entailing requirement, estimation and final execution of project. (Time to market). • Additional responsibilities to support Marketing, Finance and Purchase Departments by preparing quotations, product presentations, payment follow-up and vendor development respectively. • Monitoring and Control of Project Execution. • Project and Product cost estimation and control. • Implemented SVN repository for source code control. • Foreseeing project risks and planning risk mitigation. Quality / Safety & Reliability • Ensuring implementation of EMC standard in all products and processes Operations • Ensuring achievement of planned targets within specific deadlines. • Scheduling & planning Equipments / tools / manpower with key focus on budget and deadline. Technical Support • Providing technical support to clients (suppliers and OEMs) for resolving critical technical issues. • Analysis and investigation of in-house and field technical complaints. • Identifying performance bottlenecks and taking adequate measures to rectify faults.  less

    embedded-c microcontroller-programming microsoft-visual-basic project-management electronics embedded-systems electrical-engineering 00 more less
    • $10.00 HOURLY RATE
    • 3.0
    • 0 HOURS
    • INDIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • Software Engineer

    Let's make things better.I am looking forward to work on various projects, expand my horizon and constantly improve.I have a unique set of skills and a combined software development experience of over 7 years.My experience reaches … more

    Let's make things better.I am looking forward to work on various projects, expand my horizon and constantly improve.I have a unique set of skills and a combined software development experience of over 7 years.My experience reaches from low level Automotive Embedded Software through desktop applications up to Enterprise Architecture Software.I think this is very rare and it allows me to blend the barriers and see solutions where developers don't usually search for them.I have other skills that I acquired over the years such as fluent German language, and soft skills from working in international environments and on client's site.  less

    java android-app-development c++ embedded-c oracle-pl/sql xml german 00 more less
    • $23.00 HOURLY RATE
    • 5.0
    • 33 HOURS
    • GERMANY
    • LAST ACTIVE
    • 3 PORTFOLIO ITEMS
    • 9 TESTS
  • Electrical EngineerEmbedded System Designer

    My main objective is to provide excellent result and client satisfaction. +7 years extensive experience in the field of Electrical Engineering. a graduate of BS in Electrical Engineering, Master of Science in Electrical Engineering and got several units for doctoral … more

    My main objective is to provide excellent result and client satisfaction. +7 years extensive experience in the field of Electrical Engineering. a graduate of BS in Electrical Engineering, Master of Science in Electrical Engineering and got several units for doctoral degree. Field of interest: Power system Artificial intelligence Control system & Robotics Embedded system designing Circuit & PCB designing Software and Firmware Skills: *Extensive experience and skills on Matlab environment which includes the ff: Programming Serial Interfacing Image processing Simulink Other toolbox application *Have experience prograaming with C/C++, & Java. *Experience on various microcontroller modules which includes the ff: Zilog Arduino Basic Stamp PIC *Experience and skill on circuit & PCB design using the ff software: ISIS Professional ARES Professional Eagle CAD Hardware Skills: *Have various experience and skills on PCB fabrication for several electrical engineering related projects. *Research, design & developing control system projects focusing on renewable energy *Developing projects on robotics mainly for search-and-rescue operation such as mobile robots. Other skills: *Experience on Artificial Intelligence control using Neural Network *Renewable Energy System design focusing on efficient PV system  less

    c++ matlab internet-research embedded-c electrical-engineering image-processing serial-port-interfacing arduino plc-programming robotics artificial-neural-networks research-papers teaching-mathematics circuit-design pcb-design eagle-pcb 00 more less
    • $27.78 HOURLY RATE
    • 4.3
    • 1829 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 9 PORTFOLIO ITEMS
    • 2 TESTS
  • Design Engineer

    i am working as design engineer for last five year and has develop different types of embedded system using microcontrollers FPGAs.I have experience in digital design,embedded programing and PCB desiging.Apart from that i have used java,C … more

    i am working as design engineer for last five year and has develop different types of embedded system using microcontrollers FPGAs.I have experience in digital design,embedded programing and PCB desiging.Apart from that i have used java,C# for GUI development. Experience in Atmel/Microchip/Infenion/Dallas/TI etc 8-16bit Microcontrollers Sensors Data acquisition Systems RS422,RS485,CAN,I2C,SPI etc busses C/C++,C#,JAVA,Embedded C & Assembly PCB designing in Altium,Orcad,Design Spark etc. FPGA proramming using VHDL Xbee,GSM,RF networks PCB designing in Altium/Eagle  less

    embedded-c embedded-systems c c# java electronics matlab pcb-design autodesk technical-analysis 00 more less
    • $16.67 HOURLY RATE
    • 4.9
    • 95 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 4 TESTS
  • State Engineer

    Being electronics and computer Industry engineer, I'm actually working on embedded software development for avionics. I had worked with Power PC and HCS12 µC families. I've a small experience with µCOS-II. I'm looking for jobs where I … more

    Being electronics and computer Industry engineer, I'm actually working on embedded software development for avionics. I had worked with Power PC and HCS12 µC families. I've a small experience with µCOS-II. I'm looking for jobs where I can take challenges (embedded software or any others electronic and development activities (automation, regulation,...)  less

    electronics system-automation embedded-c embedded-systems statistics 00 more less
    • $10.00 HOURLY RATE
    • 5.0
    • 0 HOURS
    • MOROCCO
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 3 TESTS
loading