PCB Design Freelancers

Showing 302 freelancers

PCB Design Freelancers

Showing 302 freelancers

Browse Pcb Design job posts for project examples or post your job on oDesk for free!

Pcb Design Job Cost Overview

Typical total cost of oDesk Pcb Design projects based on completed and fixed-price jobs.

oDesk Pcb Design Jobs Completed Quarterly

On average, 44 Pcb Design projects are completed every quarter on oDesk.

44

Time to Complete oDesk Pcb Design Jobs

Time needed to complete a Pcb Design project on oDesk.

Average Pcb Design Freelancer Feedback Score

Pcb Design oDesk freelancers typically receive a client rating of 4.69.

4.69

Last updated: February 1, 2015

  • Electronic Engineer

    More than +123years working on electronic design projects. From High School, University and next with many companies. +50 electronic design projects. I have developed projects from the idea, prototype, and mass production. Working +1 year on PCB company I learned … more

    More than +123years working on electronic design projects. From High School, University and next with many companies. +50 electronic design projects. I have developed projects from the idea, prototype, and mass production. Working +1 year on PCB company I learned PCB DFM (Design-for-manufacture) and next working designing electronic devices to market, I learn to design choosing better componentes to have avalibility to mass production, working with outsourcing companies in Taiwan and China. I´m Bachelor on Electronic Engineering since 2008. My thesis was an ECG portable to PDA´s. All was made on SMD and Eagle. Right now I am working on a company that make electronic devices to Armor cars. Togeter with this job, I had made PCB projects for other engineers. I have experience to Schematic+PCB+BOM+Gerber files, excellon files, EPS. Design for manufacture (membrane keypads, plastic cases, Aluminum cases, etc) I have experience programming microcontrollers of the next families: Freescale HC08, HCS08, QT, QG. TI MSP430, Atmel ATTINY, ATMEGA, ARM-SAM3N. QTouch technology. Interface Bluetooth v2.0, V4.0 module (Parani, Bluegiga, Nordic), RF modules (Nordic), USB (FTDI), RS232.  less

    electronics embedded-c c# html pcb-design eagle-pcb electronic-workbench analog-electronics digital-electronics microcontroller-programming 00 more less
    • $33.33 HOURLY RATE
    • 5.0
    • 316 HOURS
    • COLOMBIA
    • LAST ACTIVE
    • 12 PORTFOLIO ITEMS
    • 5 TESTS
  • Owner, Electronic Designer, Electronic Technician

    Welcome to BKM Engineering, specializing in PCB Design and Schematic Capture, as well as Unitronics PLC program development, small scale Circuit Design, Reverse Engineering, and Home Automation development. Let me introduce myself. My name is Brian K Mcclung, and I … more

    Welcome to BKM Engineering, specializing in PCB Design and Schematic Capture, as well as Unitronics PLC program development, small scale Circuit Design, Reverse Engineering, and Home Automation development. Let me introduce myself. My name is Brian K Mcclung, and I am an Electronic Designer. As a well experienced Electronic Technician I have started BKM Engineering, primarily involved in Electronic Design / Engineering Services, online instruction in Engineering and Electronics, Home Automation development, along with other design, technical and support services. I also provide electronic assembly services, including lead free assembly. I only provide hand assembly however. Seeking a wide range of technical projects and opportunities. Specific Services provided: Schematic Capture using Eagle Standard or Multisim Personal Edition PCB Design using Eagle Standard or Ultiboard Personal Edition Unitronics PLC Program Development (Unitronics only) Reverse Engineering Examples of my work can be reviewed in my portfolio. I'm also tutoring engineering students, as well as providing circuit modifications and parts research to a few clients through various channels. I'm also very interested in pursuing opportunities in proofreading, as my 30+ years experience as a Technician has made me very detail oriented, and as I enjoy reading to begin with, it seems a natural progression. And of course, the general category of electronic technician skills would be familiar to anybody looking for a freelancer in that area. Certifications Payment and Communication Terms Determined on a case by case basis in accordance with any oDesk policies and customer specific parameters. Fixed Rate vs Hourly Jobs I generally always prefer fixed rate jobs. They afford the client more security and allow me the flexibility to determine the appropriate amount of time to spend on each task.. Consultation fees: A free 1/2 hour consultation will be given to any potential client. I request any working client who will be unavailable for more than 72 hours to notify me in advance. This is solely to prevent unnecessary effort in case of critical issues that may arise.  less

    pcb-design electronics 00 more less
    • $28.00 HOURLY RATE
    • 5.0
    • 4 HOURS
    • UNITED STATES
    • LAST ACTIVE
    • 7 PORTFOLIO ITEMS
    • 5 TESTS
  • Radiomechanic, Translator

    Over the last 3 years, I have developed a wide range of electronic devices: from guitar pedals and amplifiers to automated devices on microcontrollers. I can design and produce different types of electronics. I know technical terms and definitions on … more

    Over the last 3 years, I have developed a wide range of electronic devices: from guitar pedals and amplifiers to automated devices on microcontrollers. I can design and produce different types of electronics. I know technical terms and definitions on different languages. Also I could translate texts as I know English, Ukrainian and Russian very well. I have expirience in music composing, MS Office programs working, translation, documents and photoediting. I also have some experience in the following areas: Arduino, Microcontrollers, PCB-design, Electronic Engeneering, EAGLE, DIPTRACE, SPRINTLAYOUT, PROTEUS -CADs.  less

    guitar-composition pcb-design translation-english-russian 00 more less
    • $3.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 5 TESTS
  • Electronics Layout Designer/Graphics Designer/Web Developer/Writer

    Have a long term experience in the field with specializations in Graphic designs, Web Development, Article or Blog writing, and most Specially in Electronics with schematic designing/PCB layout designing that involved with tutorials, research, development, testing, and evaluation. Well … more

    Have a long term experience in the field with specializations in Graphic designs, Web Development, Article or Blog writing, and most Specially in Electronics with schematic designing/PCB layout designing that involved with tutorials, research, development, testing, and evaluation. Well experience in Developing and designing Schematic diagram and PCB lay out designs as my long term experience and until now as one of my prime job at 3GX solutions. It includes Analog and Digital Electronics designs.  less

    electronics pcb-design graphic-design logo-design adobe-photoshop adobe-after-effects corel-draw adobe-dreamweaver web-design css3 xhtml android-app-development ni-multisim autodesk-autocad-civil3d matlab blog-writing copywriting article-writing 00 more less
    • $13.33 HOURLY RATE
    • 5.0
    • 0 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 11 PORTFOLIO ITEMS
    • 3 TESTS
    GROUPS:
  • Hardware/Firmware/Software Engineer

    I am a 40-year old electrical engineer with a passion for sophistication and innovation. I have a lot of experience in many areas, a result of both my professional career as well as my own personal projects. Detailed profile information … more

    I am a 40-year old electrical engineer with a passion for sophistication and innovation. I have a lot of experience in many areas, a result of both my professional career as well as my own personal projects. Detailed profile information can be found at http://profile.rilhas.com I can design, test, and manufacture hardware (including PCBs) using microcontrollers, FPGAs, USB, UART, I2C, and many more, and integrate them with computers, embedded systems, mains power, motors, various sensors, etc.. It is not uncommon for hardware projects in which I’m involved to incorporate both firmware and software, or even connect to the internet or with mobile phones. I have a lot of experience in the PC world, both as a user and as a developer. I have developed high density ISDN telephony application servers (IVRs) for the main Portuguese telecom operator, with an installed base of over 2000 channels, including a voice mail system complete with voice and text fault-proof database. I have developed a large number of computer systems, both servers and clients. My work with IVR's later included testing and using various ASR and TTS technologies (for automatic speech recognition and automatic speech synthesis from the major providers like Loquendo, Nuance, Philips), applied to various areas from the IVR system themselves (directory assistance, flight booking, and more), a help support system for the elderly (consisting of an emergency telephone help server for the national Red Cross), all the way to systems for the hearing impaired (integrating with JAWS screen reader, for example). I have worked with a team to develop a tool for airport management systems, where my contribution was the development of a complete graphics subsystem based on OpenGL, which is being used up to this date (more than 10 years later), due to its capabilities not having yet been surpassed by the competition. I've developed technology to analyze video images and detect a large number of situations, including FOD at an airport in Açores, intrusion detection, early fire warning systems (marketed as CICLOPE), fire prevention systems at PORTUCEL (one of the main producer of paper and other products), illegal car parking, subterranean bus parking, automatic lane management (and infraction detection) on the 25 de Abril Bridge, and many more. I also developed technology to monitor and track bird movements using radar data. A first version used the radar image, and a more recent version uses the raw radar data (captured using a high speed data acquisition system that I also developed specifically for the radars being used). Since this system requires the display of large amounts of data (images with 30+ MPix) I also developed the visualization component (based on OpenGL). I also have some experience in CAD modeling (owing mainly to the fact that I've owned a 3D printer for several years), with which I have created numerous models for small production runs of plastic objects, mainly to assist with electronics projects but which I have also used successfully to create inexpensive plastic connectors and other components for a company that manufactures and installs solar pool heating systems, including automated 2" valves. I’ve also created custom shaped plastic cookie cutters for my wife and toys for my son. :-) I've produced several promotional 3D videos for a few companies, and I also recorded and produced music albums for a number of artists. The systems I have developed in the past make use of (of have integrated with) a wide range of languages, systems, and technologies, including C, C++, C#, JAVA, J2ME, Android, Javascript, Ruby, PIC 10/12/16/24 assembly, i386 assembly, MMX/SSE2, Verilog, TCP/IP, UDP, OpenGL, USB, WiFi, Bluetooth, Raspberry Pi, BeagleBone Black, Windows, Linux, POTS, ISDN, ASR, TTS, among many others. Many of the projects I've worked on have included other people, and I have been the project manager on most of them. For the larger projects where I was not the project manager (like those involving airport security, for example) I was the team leader of the corresponding project component. Given my extensive experience with complex and innovative projects (where a solution is not always obvious from the start and a great deal of creativity is need as the project progresses), I have also developed good skills and intuition for preventing and detecting bugs, both at a code testing stage as well as (more importantly) at a design or specification stage. These skills have proven crucial over the years, and I think that the success of all the projects I worked on depended heavily on them.  less

    software-debugging c c++ java javascript j2me microsoft-visual-basic pcb-design electrical-engineering image-processing 00 more less
    • $40.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • PORTUGAL
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 0 TESTS
  • Embedded Systems Designer and MCU / Arduino Programmer

    Experienced electronics engineer in the following technologies: C programming for micro-controllers - 11 years Arduino - 3 years Electronics circuit design - 6 years Atmel AVR - 3 years Microchip PIC - 3 years Rabbit Semiconductor - 5 years Freescale ARM Cortex M4 - 2 years Freescale HC08 - 1 year

    arduino microcontroller-programming microcontroller-design circuit-design atmel-avr pcb-design 00 more less
    • $19.56 HOURLY RATE
    • 5.0
    • 11 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 6 TESTS
  • Electrical/Electronics Engineer and PCB Designer

    I am an electrical/electronics engineer with PCB design experience. Since 2010 I have worked in the design and development of electronic systems from concept to full project completion, using analogical and digital circuits and sensors, microcontrollers and software data … more

    I am an electrical/electronics engineer with PCB design experience. Since 2010 I have worked in the design and development of electronic systems from concept to full project completion, using analogical and digital circuits and sensors, microcontrollers and software data processing. I have experience in schematic drawing, circuit and PCB design, circuit simulation and microcontroller programming. I am an experienced user of Altium Designer in circuit simulation, schematic and PCB design, and I also know how to use 3D cad modeling solidworks software for component 3D bodies and enclosure fitting design and validation. I have dedicated myself to work in the embedded systems and automotive electronics, since I have a 3 years experience with BAJA SAE (Society of Automotive Engineers) where I developed several electronic measurement systems (a more details description can be found at the "other experiences" section of my profile). I have worked in several projects involving OrCAD SPICE Simulation, data acquisition, analog and digital circuitry, Arduino and FreeScale programming, communication protocols, LabVIEW programming and MATLAB post processing and analysis. I am a proactive and self-motivated person looking for develop further skills and help engineering solutions. I am an organized person capable of providing high quality work in order to meet and exceed expectations and guarantee the best results.  less

    electrical-engineering electronics embedded-systems electronic-design pcb-design altium-desiger microcontroller-programming arduino project-management product-development 00 more less
    • $17.00 HOURLY RATE
    • 5.0
    • 129 HOURS
    • VENEZUELA
    • LAST ACTIVE
    • 9 PORTFOLIO ITEMS
    • 6 TESTS
  • Design Engineer

    i am working as design engineer for last five year and has develop different types of embedded system using microcontrollers FPGAs.I have experience in digital design,embedded programing and PCB desiging.Apart from that i have used java,C … more

    i am working as design engineer for last five year and has develop different types of embedded system using microcontrollers FPGAs.I have experience in digital design,embedded programing and PCB desiging.Apart from that i have used java,C# for GUI development. Experience in Atmel/Microchip/Infenion/Dallas/TI etc 8-16bit Microcontrollers Sensors Data acquisition Systems RS422,RS485,CAN,I2C,SPI etc busses C/C++,C#,JAVA,Embedded C & Assembly PCB designing in Altium,Orcad,Design Spark etc. FPGA proramming using VHDL Xbee,GSM,RF networks PCB designing in Altium/Eagle  less

    embedded-c embedded-systems c c# java electronics matlab pcb-design autodesk technical-analysis 00 more less
    • $16.67 HOURLY RATE
    • 4.9
    • 95 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 4 TESTS
loading