I am a 29 year old Energy Engineer, from France. I have two Master's diplomas in Engineering, including a successful semester spent abroad in Australia. My work experience ranges from R&D Photovoltaic Engineering in Germany, to consulting for NGOs throughout the world, as well as extensive volunteering. Most of my work has been conducted in English, and a lot of it involved communication mixing both French and English. I am a self-taught person with interests in diverse subjects, such as sailing voyages, permaculture, cooking, diving, and developing my electric bike. I developed a strong command of both French and English through years of reading, learning, and living abroad. Additionally, I have studied English/French translation as a compulsory element of my graduate education. For these reasons, I sometimes offer my services as a translator or content-writer. As a professional engineer and consultant, I always make sure that my clients are getting above and beyond what they expect within the allotted time frame. I am currently developing a community-based project involving the reuse of LiCo batteries. Thus, working online is a perfect opportunity for me to be able to acquire enough capital to kickstart my new venture.
Electrical engineering Job Cost Overview
Typical total cost of oDesk Electrical engineering projects based on completed and fixed-price jobs.
oDesk Electrical engineering Jobs Completed Quarterly
On average, 98 Electrical engineering projects are completed every quarter on oDesk.
Time to Complete oDesk Electrical engineering Jobs
Time needed to complete a Electrical engineering project on oDesk.
Average Electrical engineering Freelancer Feedback Score
Electrical engineering oDesk freelancers typically receive a client rating of 4.70.
If you want to create a trading system, run a statistical analysis, develop a pricing model, build a financial GUI, or find a pattern in a sea of data, I may be the guy to help. I work primarily in MATLAB, C#, and Python. On the finance side, I'm a CAIA Charterholder, with an Economics degree and experience at McKinsey & Company. On the technical side, I hold degrees (with honors) in Engineering, and worked at a number of California tech companies through the 1990's and early 2000's. Since 2008 I've focused my work in the field of computational finance. Recent clients have included: a Swiss proprietary trading desk (Energy Futures), a Canadian hedge fund (Currencies), a US asset management firm (Equities & Bonds), a US portfolio consulting firm, a US aircraft manufacturing operation, and several others. For those clients I have developed, backtested, and deployed alpha-seeking trading strategies, automated execution algorithms, portfolio optimization models, user-friendly GUI tools. Techniques have included machine learning algorithms, classifiers, feature detectors, digital filters, matrix-based models, and concepts borrowed from detection theory and signal processing, along with various technical analysis indicators. I've worked with many financial platforms and data feeds: Deltix QuantOffice (C#), CQG API, Bloomberg, Interactive Brokers API, MultiCharts (PowerLanguage), MultiCharts.NET (C#), TradeStation (EasyLanguage), FIX (HotspotFx), ITCH (HotspotFx), etc. I can integrate other systems with MATLAB or Excel where there's an advantage. I've created C/C++ .mex files, VBA macros, Java/MATLAB integration, MATLAB/Excel integration. I've been programming in MATLAB since 1990, and can sometimes get it to do things that others can't. I can also translate or port a MATLAB application to other languages, especially Python or C#. I'm located in Southern California. For clients located within 2 hours, I can drive to meet you (sometimes same day, schedule permitting). I'm also happy to work remotely. I'm a US Citizen and have held a security clearance, though it is no longer active. The foundation of every successful project is good communication. If you have a project that needs to be done well, then let's communicate!
I'm interested in all aspects of antenna design and integration from conception to testing of the installed product, including antenna measurement system design and implementation, hardware integration, and development of test, measurement, and analysis software. I have 25 years of corporate experience in electromagnetic theory and design including field theory, and antenna and RF design. My technical background includes o Ten years experience in electromagnetic modeling and development using FEKO o Proficient developing electromagnetic aircraft models using CAD tools such as FEMAP and CADFEKO o Hardware design, fabrication, test, implementation and integration of antennas o RF signal processing, FFT analysis, RWR AOA error analysis RF compatibility studies as well as the development of coupling and RF cosite compatibility analysis tools o Link margin analysis and studies between air and ground stations o Shielding effectiveness and lightning effects analysis and modeling o Coupling and multipath measurements, studies, and analysis o Design, development, and integration of automated RF and antenna test systems including positioner control, and multi-channel data acquisition using PNA analyzers o Proficient in the development of data acquisition and analysis software using Visual Studio.net Applications have included o Large aircraft antenna, and RF component system integration o Antenna and radome design and modeling o FEKO analysis including aircraft CAD model development, employment of various modeling techniques, and consulting/ mentoring o Cosite analysis including the compatibility between systems on a platform, knowledge of the techniques to minimize system-to-system interference, and consulting/ mentoring o Developing specifications, statement of work, and managing the technical aspects for subcontracted component suppliers o Application and testing with basic passive microwave components including but not limited to antennas, transmission lines, filters, isolators, and switches o Application and testing with active microwave components; primarily amplifiers, receivers and transmitters o Design, fabrication, testing and integration of military antenna systems and RF components o Antenna performance improvement by designing, testing, recommending and implementing solutions Since leaving the corporate world, I have enjoyed programing and other analytical challenges in other areas of application including electronic design, education, and finance.
Past Experience in Electronics: ATMEL, Spain S.A.U., Zaragoza, Spain Senior Hardware Engineer 2011 - 2012 Complete product design (schematic, PCB and hardware) (Altium Designer) of Power Line Comms and RF circuits using ARM based chipsets - Smart Meter market - Gas Natural, Incaelec, GE. Pace PLC, Shipley, U.K. Senior Hardware Engineer 2003 - 2011 Schematic / Layout design (Mentor Graphics) of DC-DC, A/V, comms circuits using Broadcom based chipsets - Set-Top Box market - Sky, Comcast, AT&T. Harvard Engineering, Leeds, U.K. Electronic Design Engineer 2000 - 2003 Complete product design (Eagle / AutoCAD) of electronic ballast circuits using International Rectifier based chipsets - Lighting market. United Automation, Southport, U.K. Electronics Technician 1998 - 1999 Soldering, Test, Wiring of electronic power controller circuits. The University of Sheffield, U.K. Degree in Electronic Engineering (BEng) 1996 - 2000 Specialising in Audio Design - Class D power amp final project. I have been involved in electronics design and prototyping since an early age and continued my interest into industry, as shown above, after completing a degree in Electronics Engineering at The University of Sheffield in the U.K (Graded 2-1). I am now working as a contractor / consultant on a freelance basis as a professional Electronics Design Engineer using Altium 2014, or Eagle to design schematics and PCBs for clients. I specialise in audio and consumer electronics design, but have a wide range of experience, having worked in China, Mexico, Romania, Spain, and the UK (in both production facilities and design houses).
To contribute with my efforts and skills to the research and developement in the field of image/signal processing, machine learning and embedded digital design. I am working in such environment which gives me opportunities to learn, innovate and evolve into a successful and responsible professional. I have 9 years of relevent education and 4 years of working experience in the area of Image Processing, Statistical Learning, Digital System Design and now doing PhD in the same field.
Well before the World Wide Web was a common phrase as it is today, before most people even owned a home computer I was programming code in a variety of languages for a variety of network related projects back when you had to put the handset of a telephone on a 300 baud modem. Trillions of lines of code under my belt and a mind that functions like a computer processing unit I not only understand today's most popular programming languages, I know how the languages themselves came to be. I am an expert who has owned, operated or worked with thousands of technology based businesses over the past 25 years. More than a programmer, I am a valuable consultant to any business wishing to build or improve any online enterprise. My work is relatively fast, accurate, functional and most importantly well constructed based on your exact needs. I do all of my own work but will bring in experts if necessary to accomplish the goals of your organization. I am an American living in Pennsylvania.
Mohamed anis M. Agency Contractor
I have a very good experience with Assembler, C, C++, java and C#. I have been working with C for more than 5years for desktop and embedded systems. I have a lot of experience with Microchip PIC, msp430, ARM based microcontroller and DSPs. I'm accustomed to working with CAD software such as Proteus (Isis / Ares) and Altium designer. Also I speak English and French fluently.
Registered Patent Attorney with technical expertise in: Electronics, Laser Systems, Photonics, Software, Solar Cells, Medical Devices, GPS, Internet Applications, Optics, Telecommunications, MRI, Wireless/Mobile Devices, Image Processing, Dynamic Systems, Thermodynamics, Computer Systems, Nano Systems, Electrical and Mechanical Systems, Flight Vehicle Structures, and Nuclear Physics. Over one hundred fifty patent applications prepared and prosecuted.
I graduated with honors from Southern Polytechnic State University with a bachelor's degree in Mechatronics Engineering. I was one of the thirteen students in the first graduating class from the school. I have become a very proficient control systems engineer over the years, mainly working with clients in the water and waste water treatment and distribution industry. Over this time, I have gained profound experience using all of the devices available from most of the big name PLC and SCADA software companies, such as Allen-Bradley, Schneider Electric, Automation Direct, Wonderware, Maple Systems, etc. I have also gained experience in a variety of other areas, including performing electrical wiring, submitting design documents, managing projects, designing CAD drawings, configuring applications, designing and troubleshooting network configurations,creating HMI's, and much more. During my spare time, I try to keep in touch with my Mechatronics roots and work on small scale robotics or embedded projects. To sum it all up, I'm basically just one of those guys who was born to be an engineer. I'm extremely technical and I love to tackle any idea or issue.