I have a comprehensive background in product development/project management within the confines of international medical device regulations. I thrive on taking vague ideas and ill-defined needs and turning them into concrete reality. I can start a medical device company from the ground up and I can do it on schedule. This includes... From a Regulatory perspective: --Initial regulatory requirements analysis for new markets (EU, Brazil, Australia, US, Canada, etc.) --Identification of applicable test protocols (ISO standards, etc.) and management of test houses --Interfacing with regulatory agencies and identifying consultants --Writing of regulatory submissions such as FDA 510(k)s --Quality System development and implementation to required standards (ISO 13485, FDA, CMDCAS, etc.) --Identification of loop holes and temporary workarounds to ease implementation pains and maintain profitability From a Project perspective: --Using good interpersonal skills to keep people motivated and excited --"Conducting the orchestra", developing a logical rhythm of events and ensuring timely completion of tasks --Turning "unknown unknowns" into "known unknowns", forseeing problems before they arise and altering the "orchestra" accordingly --Coordination of teams on an international level --Intelligently focusing energy on tasks with the highest variability, including procurement of additional expertise as necessary --Always keeping an open dialog about the day-to-day changes in the "Good/Fast/Cheap, pick any two but only two of the three" trade-offs in milestone achievement From a Product perspective: --Development of design parameters from organization input (Sales, Marketing, Support, etc.) --Nitty-gritty technical work like engineering drawings/drafting, statistical analysis, resdesigns due to manufacturing constraints, component supplier identification. --Identification, qualification, and day-to-day management of international manufacturers --Design History File/Technical File development and maintenance --Design Transfer for complex electromechanical devices From an Operations perspective: --Part Number/Drawing Number/Revision Control development and implementation --Engineering Change Order workflow and impacts --Purchasing-Manufacturing-Sales-Shipment procedures and throughput --ERP/MRP implementation including workarounds for system limitations I am a strong believer in a person's word. If I tell you I'm going to do something by a certain date that is my word and I'm going to get it done, hell or high-water. I don't mess around: I live on a remote homestead so I grow my own food, build my own structures, fix my own car, brew my own beer. My entire life requires a high level of precision execution every single day, failure is not an option.
Browse Enterprise Resource Planning (ERP) job posts for project examples or post your job on oDesk for free!
Enterprise Resource Planning (ERP) Job Cost Overview
Typical total cost of oDesk Enterprise Resource Planning (ERP) projects based on completed and fixed-price jobs.
oDesk Enterprise Resource Planning (ERP) Jobs Completed Quarterly
On average, 12 Enterprise Resource Planning (ERP) projects are completed every quarter on oDesk.
Time to Complete oDesk Enterprise Resource Planning (ERP) Jobs
Time needed to complete a Enterprise Resource Planning (ERP) project on oDesk.
Average Enterprise Resource Planning (ERP) Freelancer Feedback Score
Enterprise Resource Planning (ERP) oDesk freelancers typically receive a client rating of 4.67.
I have been a part of multiple projects over the past 15 years, on board as an employee, lead consultant and/or short term contractor. I have completed numerous projects with proven success and innovating solutions, on time, and consistently under budget. Effective use of technology and management to increase profits, productivity, and competitive edge while delivering significant reductions in cost of doing business. Backed with solid credentials in Bachelors of Science in Electrical Engineering with multiple certifications. My focus has been Microsoft Server R2 and Exchange in Administration and Support. Consulted in Company Structured Network with Virtualization and VPN Tunneling. Over the years I have gained experience with multiple platforms both implementing and support. I was also fortunate enough to be immersed into the EDI and ERP System. A company presented me with a challenge to upgrade their existing EDI Server and implement, (grounds up solution) a full blown ERP Server with full functional system from financing to ménage purchase order, employee time track to full management report (Daily report, Weekly report and so on..) system.
To give my best in doing whatever work is given. To do my work in a detailed,accurate and neat manner.I am expert in ERP Oracle,Magento,Amazon,Visual Basic,Accounts Payable,Wordpress,Web Research
Seeking career enhancements by contributing highest level of service and standards as Translator Consultant with reputed concerns in the areas of finance, Management, ICT utilizing experience and expertise gained across career span.
Please allow me to introduce myself My name is Jacques Du Toit. I am a young and very energetic young individual with a passion and a lust for life. I am very deadline orientated and highly goal driven, I strive for personal success as well as employer success to reach better and more innovative achievements and greater growth. I have a very friendly but yet professional appearance. Some of my strong points include: high levels of analytical thinking, my work is always neat, I’m a fast and independent worker, very fast learner, I always have a hunger for new skills and experience. I always devote my full attention to a project or a task until it is complete. I am also very competitive. I am a man of integrity and I stand by that. Thank you for your time and patience.
I am a graduate of Bachelor of Science in Civil Engineering with 9 years experience on Tutoring students from Kindergarten to College Students 3 years expererience as AutoCAD Operator in the construction industry 2 years experience as Sales Engineer 1 year experience as Procurement/Purchasing Officer I am looking forward to work on jobs related mainly to: 1. Mathematics 2. Online Tutoring 3. Data Entry 4. Research 5. Virtual Assistance 6. Transcription 7. Content Writing 8. Academic Writing 9. Photo Editing 10. AutoCAD I have excellent computational and analytical skills. I have understanding on how to make students, especially kids with very short attention spans, keep their focus while studying. I am also able to formulate techniques to simplify a certain problem and teach it to the student without too much spoon-feeding of information, so they'd become trained critical thinkers themselves. I also write my own Math questions for the students to work on so I will be able to evaluate them. To add on, I also have good English grammatical and communication skills. I am able to communicate with clients personally as part of my job as Sales. I am also familiar with communicating for local ang international deliveries and negotiating with suppliers being an experienced Procurement/Purchasing Officer. My typing speed is 40 words per minute with 100% accuracy. I have great enthusiasm in gaining new ideas and concepts through the use of the Internet to further improve my personal and professional skills.
I'm a resourceful person able to accomplish tasks and find solutions integrating various fields of expertise, based primarily on a "what it can do" instead of a "what it is meant to do" approach of the tools and techniques learned along the way, whether is a hardware tool, a machinery, light, heavy, industrial or scientific equipment, a software tool, a procedure or a technique. Naturally, in the formal studies I graduated and became an electronics engineer and that helped me to work with design and implementation in the field. Also, I have gathered the skills to work with the following: -2D & 3D design -Electronics design, microcontrollers, robotics. -Software programming, PHP, HTML, PERL, as well as low level (assembler) -Prototypes. Cutting, sanding, welding, drilling..... able to handle equipment for building "things". -Heavy machinery.... cranes(15 ton), pneumatic hammer, sandblasting. -Translation. Native latin american spanish speaker with TOEFL.
This is Abdul Rehman, I am a Programmer Analyst with highly technical background, working for last 3 years as a result oriented, sincere and creative professional with self learning and problem solving capabilities, currently employed as an Assistant Manager IT at and advertising company in Abu Dhabi, having strong background in client meeting, and data gathering from clients using System Analysis & Business Analysis techniques ERP, POS, CRM, Back Office implementations, Business Intelligence BI Dashboard development, design and development of Business requirement documentation, GAP Analysis documentation with strong understanding of SDLC process, In Depth Understanding of Industrial Business Processes, Process Flows, Business Rules & Requirements, Tracking Record in Development, User Acceptance Testing and End User Training, Providing solutions to medium & large enterprise organizations with complex manufacturing environments including Ceramics & Paint Manufacturing Industry, Hospitality Industry, Hospitals, Accounting firms and College/Universities. My versatile experience so far has equipped me with the tools to be a dominant Programmer Analyst with the specialties in: ERDs, UMLs, MS Visio, MS Office, Visual C#, VB.NET, SQL Server, MS Access, MySQL, Crystal Reports, Qlikview, KlipFolio. Intuit QuickBooks data to KlipFolio Integration (Online, Desktop, qbXML, QuickBooks Web Connector), Axure, HTML, Wordpress, Hardware/Software troubleshooting, Networking, Corel Draw, Photoshop for designing Logos, Banners, Flexes etc. and knowledge of operating CNC Router, Printer, Plotter, Ability to Perform under pressure and meeting deadlines, Leadership skills, Very strong communication and interpersonal skills.
B.S. in Manufacturing and Mechanical Engineering Technology from Texas A&M University. I am working full time as a Mechanical Design Engineer for a fortune 500 company. I have several years experience using several different 3D CAD programs such as Solidworks, Pro/E, Inventor, and Creo 2.0. I use Solidworks primarily and am fluent with the program. I can create 3D models, assemblies and sub-assemblies, 2D drawings, BOM, cutlists, schematics in AutoCAD, etc. I have experience in component selection and design engineering practices. Let me know what I can do for you.