Altium Designer Freelancers

Showing 213 freelancers

Altium Designer Freelancers

Showing 213 freelancers

Browse Altium Desiger job posts for project examples or post your job on oDesk for free!

Altium Desiger Job Cost Overview

Typical total cost of oDesk Altium Desiger projects based on completed and fixed-price jobs.

oDesk Altium Desiger Jobs Completed Quarterly

On average, 10 Altium Desiger projects are completed every quarter on oDesk.

10

Time to Complete oDesk Altium Desiger Jobs

Time needed to complete a Altium Desiger project on oDesk.

Average Altium Desiger Freelancer Feedback Score

Altium Desiger oDesk freelancers typically receive a client rating of 4.67.

4.67

Last updated: April 1, 2015

  • PCB Designer, Embedded C programmer

    I have 6 year of experience in PCB Designing. I have extensive hand on experience on ORCAD10.5, altium designer 10e and Eagle tools in Schematic designing, and PCB designing. I had designed upto 8layer boards. I have done the … more

    I have 6 year of experience in PCB Designing. I have extensive hand on experience on ORCAD10.5, altium designer 10e and Eagle tools in Schematic designing, and PCB designing. I had designed upto 8layer boards. I have done the design for SDRAM, DDR2, DDR3 RAM. I have intensive experience in Hardware Development. In Hardware development I worked on each part to make a product from concept like Development, PCB design, Hardware troubleshooting, Assembly, Components Procurement, interaction with production team, Service Team etc. I have done the reverse Engg. of about 5-6 different products. Now I'm working on a ARM based product having WiFi, Zigbee, CDMA, Ethernet, RFID and High Intensity RGB LED. I also worked on GSM and GPS based product.  less

    pcb-design orcad altium-desiger eagle-pcb 00 more less
    • $20.00 HOURLY RATE
    • 4.4
    • 156 HOURS
    • INDIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 2 TESTS
  • Electronics Design Engineer / Programmer

    Fully qualified electronics design engineer with over 10 years experience in the design of electronic systems. I have experience in various area of electronic design including: embedded systems, analog circuits, high power switching controls, low power battery operated devices, wireless … more

    Fully qualified electronics design engineer with over 10 years experience in the design of electronic systems. I have experience in various area of electronic design including: embedded systems, analog circuits, high power switching controls, low power battery operated devices, wireless designs, microcontroller (AVR, ARM, PIC...) systems and design of high performance processor systems running embedded Linux. My primary EDA is Altium Designer.  less

    electronics engineering-design embedded-systems pcb-design altium-desiger embedded-c embedded-linux linux-system-administration c++ java 00 more less
    • $35.00 HOURLY RATE
    • 5.0
    • 6758 HOURS
    • MALTA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 9 TESTS
  • Electronics Engineer, Hardware&Software Desing

    I have experience with embedded hardware and software design, DC and AC motor control. I worked with and created many types of sensors (IR, temperature, ultra sound...). I also create software for various types of microcontrollers(dsPIC, ATMEL, NXP...). I … more

    I have experience with embedded hardware and software design, DC and AC motor control. I worked with and created many types of sensors (IR, temperature, ultra sound...). I also create software for various types of microcontrollers(dsPIC, ATMEL, NXP...). I have exellent knowledge of PCB design and I'm good with power electronics. I can take the project through the complete NPD (New Product Development) cycle.  less

    electronics embedded-c microcontroller-programming altium-desiger 00 more less
    • $15.00 HOURLY RATE
    • 5.0
    • 38 HOURS
    • SERBIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • Engineer Experienced in Electronics Design & 2D/3D CAD

    If you are looking for a reliable professional for your electronics design, CAD & 3D requirements, I can provide these services in a timely manner. I have over 20 years of cumulative experience doing electronics design, familiar with the entire product … more

    If you are looking for a reliable professional for your electronics design, CAD & 3D requirements, I can provide these services in a timely manner. I have over 20 years of cumulative experience doing electronics design, familiar with the entire product development process as well as producing AutoCAD drawings, this being a part of my skill set as an engineer. I also produce 3D drawings using Rhino 3D. I am very meticulous in my work and pays very close attention to details to provide you with an accurate finished product.  less

    autodesk microsoft-visio microsoft-word microsoft-excel corel-draw orcad eagle-pcb altium-desiger 00 more less
    • $11.11 HOURLY RATE
    • 4.9
    • 1159 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 8 PORTFOLIO ITEMS
    • 16 TESTS
  • PCB Design Engineer and Firmware developer

    I am an Electrical engineer by profession. For the last 4 years, I have been serving as a fabrication specialist at Arcistech. My specialties include high frequency designs, algorithm and firmware development, rapid prototyping and prototype testing. I have considerable … more

    I am an Electrical engineer by profession. For the last 4 years, I have been serving as a fabrication specialist at Arcistech. My specialties include high frequency designs, algorithm and firmware development, rapid prototyping and prototype testing. I have considerable experience in Proteus suite, Eagle Cadsoft, Autocad, SolidWorks as well as several microcontroller platforms including PIC and Arduino. I ensure timely results with no compromise on quality.  less

    pcb-design circuit-design eagle-pcb embedded-systems electrical-engineering electronics electrical-drawing c altium-desiger arduino 00 more less
    • $35.00 HOURLY RATE
    • 4.9
    • 146 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 16 PORTFOLIO ITEMS
    • 6 TESTS
    ASSOCIATED WITH:
  • Hardware engineer

    Over 3 last years, I have developed,mounted and debugged few boards: 1) 6U board based on CompactPCI including Arria II GX, Max II(EPM2210), SSRAMs,PCI controller PLX9656, Fast Ethernet controller, Optical tranceiver etc. (8-layer board) 2) 6U rear … more

    Over 3 last years, I have developed,mounted and debugged few boards: 1) 6U board based on CompactPCI including Arria II GX, Max II(EPM2210), SSRAMs,PCI controller PLX9656, Fast Ethernet controller, Optical tranceiver etc. (8-layer board) 2) 6U rear i/o board on CompactPCI including Cyclone IV, SSRAMs, ADC 14bit, DAC 14bit etc. (8-layer board) 3) Mezzanine card on PMC including Stratix IV,Max II(EPM2210), DDR II, QDR, SFP, PLX 9656 etc. (14-layer board)  less

    fpga pcb-design altium-desiger hardware-troubleshooting j2se j2ee embedded-systems verilog electronics electronic-workbench 00 more less
    • $11.11 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 727 HOURS
    • BELARUS
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 0 TESTS
  • Electronics Engineer

    I am an electronic engineer having wide industry experience with focus on Multi-Layer PCB Design, Wireless Solutions, Embedded System Design. Following are my areas of expertise; PCB Design Services -- Schematics capturing, Bill of Material (BOM) -- IPC standards PCB Footprints, 3D … more

    I am an electronic engineer having wide industry experience with focus on Multi-Layer PCB Design, Wireless Solutions, Embedded System Design. Following are my areas of expertise; PCB Design Services -- Schematics capturing, Bill of Material (BOM) -- IPC standards PCB Footprints, 3D footprints using Step Models -- Mixed Signals / RF Layout using Multi-Layers to provide flexibility for high speed, space constrained designs -- Components Sourcing and Board Bring-up -- 3D PCBs Technology Nodes -- High Speed Designs for; FPGA, CPLD, ARM Cortex, Microcontrollers (PIC, Atmel), DSPs, USB (2.0/3.0), Ethernet, DDR2/3, DAC, ADC -- Wireless; Bluetooth (Nordic and TI SoC), ZigBee, WiFi, GSM, GPS, Balun Filters, PCB/Chip Antennas -- Power Management, Battery Management; Board Power estimation and Power circuits design (Linear/Switching Regulators), Battery monitoring and charging circuits design Embedded Firmware -- C++, Verilog, Assembly  less

    pcb-design altium-desiger circuit-design bluetooth embedded-systems microcontroller-design fpga verilog c++ 00 more less
    • $25.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 569 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 4 PORTFOLIO ITEMS
    • 3 TESTS
  • Embedded systems engineer

    I'm professional designer of electronics hardware and software using modern microcontrollers (mostly ARM based, PIC and AVR, but there are no restrictions) and FPGA/CPLD. This consist of working on concept, schematic and pcb work. I also have a … more

    I'm professional designer of electronics hardware and software using modern microcontrollers (mostly ARM based, PIC and AVR, but there are no restrictions) and FPGA/CPLD. This consist of working on concept, schematic and pcb work. I also have a strong C /Assembly knowledge to develop uC firmware. I have an good experience of SMD soldering work, and I've got all necessary equipment (even a little lab), so it's not a problem to assembly and test your device quickly. Looking forward for interesting tasks and long-term cooperation!  less

    embedded-systems embedded-c c fpga pcb-design altium-desiger assembly-language 00 more less
    • $25.30 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • RUSSIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 1 TEST
  • Ingeneer

    Last 3 years I've been working with C in GNU/Linux both Desktop and Embedded Systems. My main expertise is in process control. Over the last year I've been working with C++ for personal projects and others for … more

    Last 3 years I've been working with C in GNU/Linux both Desktop and Embedded Systems. My main expertise is in process control. Over the last year I've been working with C++ for personal projects and others for the university, which include Robotics and Genetic Algorithms and Image Processing. Other language I'm keen on is LaTeX, since I've been using it to write reports on since 2010. I have experience with the following C/C++ libraries: - OpenCV - Bullet Physics - GTK - Qt  less

    c electronics latex c++ linux-system-administration embedded-linux altium-desiger hardware-troubleshooting 00 more less
    • $21.11 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • ARGENTINA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 7 TESTS
loading