CAD Specialists & Designers

Showing 30 freelancers

CAD Specialists & Designers

Showing 30 freelancers

  • Senior Project Manager/Product Developer

    I have a comprehensive background in product development/project management within the confines of international medical device regulations. I thrive on taking vague ideas and ill-defined needs and turning them into concrete reality. I can start a medical device company … more

    I have a comprehensive background in product development/project management within the confines of international medical device regulations. I thrive on taking vague ideas and ill-defined needs and turning them into concrete reality. I can start a medical device company from the ground up and I can do it on schedule. This includes... From a Regulatory perspective: --Initial regulatory requirements analysis for new markets (EU, Brazil, Australia, US, Canada, etc.) --Identification of applicable test protocols (ISO standards, etc.) and management of test houses --Interfacing with regulatory agencies and identifying consultants --Writing of regulatory submissions such as FDA 510(k)s --Quality System development and implementation to required standards (ISO 13485, FDA, CMDCAS, etc.) --Identification of loop holes and temporary workarounds to ease implementation pains and maintain profitability From a Project perspective: --Using good interpersonal skills to keep people motivated and excited --"Conducting the orchestra", developing a logical rhythm of events and ensuring timely completion of tasks --Turning "unknown unknowns" into "known unknowns", forseeing problems before they arise and altering the "orchestra" accordingly --Coordination of teams on an international level --Intelligently focusing energy on tasks with the highest variability, including procurement of additional expertise as necessary --Always keeping an open dialog about the day-to-day changes in the "Good/Fast/Cheap, pick any two but only two of the three" trade-offs in milestone achievement From a Product perspective: --Development of design parameters from organization input (Sales, Marketing, Support, etc.) --Nitty-gritty technical work like engineering drawings/drafting, statistical analysis, resdesigns due to manufacturing constraints, component supplier identification. --Identification, qualification, and day-to-day management of international manufacturers --Design History File/Technical File development and maintenance --Design Transfer for complex electromechanical devices From an Operations perspective: --Part Number/Drawing Number/Revision Control development and implementation --Engineering Change Order workflow and impacts --Purchasing-Manufacturing-Sales-Shipment procedures and throughput --ERP/MRP implementation including workarounds for system limitations I am a strong believer in a person's word. If I tell you I'm going to do something by a certain date that is my word and I'm going to get it done, hell or high-water. I don't mess around: I live on a remote homestead so I grow my own food, build my own structures, fix my own car, brew my own beer. My entire life requires a high level of precision execution every single day, failure is not an option.  less

    project-management solidworks product-development cad-design medical-imaging drafting engineering-drawing chemical-engineering mechanical-engineering reverse-engineering 00 more less
    • $38.89 HOURLY RATE
    • 5.0
    • 1205 HOURS
    • UNITED STATES
    • LAST ACTIVE
    • 10 PORTFOLIO ITEMS
    • 1 TEST
  • Mechanical Design Engineer

    Over the last 13 years, I have been working primarily on product design and development of consumer products. When I say " I have been working..", I am directly involved on every process of the product development as follows : 1. Concept … more

    Over the last 13 years, I have been working primarily on product design and development of consumer products. When I say " I have been working..", I am directly involved on every process of the product development as follows : 1. Concept generation / Brain storming 2. Engineering design 3. Rapid prototyping (CNC, SLA, SLS, FDM, objet), prototype assembly and prototype evaluation 4. Design adjustments (if needed) based on the prototype 5. Mold meeting / Mold design approval 6. First article inspection 7. Parts approval during injection / Parts approval for non-injected parts 8. Mass production supervision I am also familiar with different manufacturing processes like metal stamping, ultrasonic welding, blow molding, compression molding and extrusion (both metal and plastic). With all the knowledge and exposures that I have acquired, I would say that I am not contractor by the "drawing board" only but a contractor who can deliver any consumer product to the market.  less

    mechanical-engineering product-management 3d-modeling proe industrial-design cad-design engineering-drawing project-management 00 more less
    • $38.89 HOURLY RATE
    • 5.0
    • 1056 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 6 PORTFOLIO ITEMS
    • 4 TESTS
  • 3D CAD/3D Print/CSWP Solidworks Designer

    Solidworks/AutoCAD certified 3D CAD Engineer at your service! Over the last 8 years, I have developed a quality experience in Solidworks, 3D CAD Design,3D modeling, AutoCAD, 3DS max and Mechanical Engineering designs. I have recently attained Solidworks certification … more

    Solidworks/AutoCAD certified 3D CAD Engineer at your service! Over the last 8 years, I have developed a quality experience in Solidworks, 3D CAD Design,3D modeling, AutoCAD, 3DS max and Mechanical Engineering designs. I have recently attained Solidworks certification named as Certified Solidworks Professional. My objective is to polish my 3D mechanical CAD skills as well as to provide the employers with excellent service at a fair cost by by fully devoting myself to the task. I have a complete set of skills that are required in a perfect 3D mechanical design engineer. I have experience in using most of the engineering , CAD and 3D design softwares with an exceptional ability in Solidworks. Now a days I prefer doing most of my 3D design projects on Premium version of Solidworks 2014 Since It is an excellent tool for 3D mechanical desgn. Following are some 3D design Softwares I have currently available: 3DS Max 2013 3DS Max 2012 3DS Max 9 3DS Max 7 Solidworks 2011 Solidworks 2012 Solidworks 2013 Solidworks 2014 Auto CAD 2012 Auto CAD 2010 Auto CAD 2007 Auto CAD 2004 I am very strong in the following areas: 3D Modeling 3D visualization 3D Animation 3D Rendering 3D CAD design 3D Mechanical Simulations FEA Machine design I have the ability to work under the given time, resource and design constrains. Machine design in Solidworks and 3D CAD is my speciality. For any employer who wants the task to be completed quickly and successfully, these skills would surely be an asset. Tags: Solidworks, 3D CAD design, Mechanical Manufacturing, Mechanical Design, Automotive Engineering, AutoCAD, 3D design, 3D print, 2D design, 3DS max, Maya, 3D animation, 2D Animation, Mechanical Engineering, Machine Design, Product Design, Industrial Design, Drafting, Inventor, 3D modeling, Analysis, Mechanical engineering  less

    solidworks cad-design 3d-design 3d-modeling 3d-printing 3d-rendering mechanical-engineering autodesk-3d-studio-max autodesk structural-engineering 00 more less
    • $22.22 HOURLY RATE
    • 4.9
    • 1076 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 66 PORTFOLIO ITEMS
    • 17 TESTS
  • Fast & Expert Graphic Designer

    For the past 7 years I've been designing different kinds of logo and other related designs. I'm very passionate in my field and at the same time I enjoy what I do. This is my way of expressing … more

    For the past 7 years I've been designing different kinds of logo and other related designs. I'm very passionate in my field and at the same time I enjoy what I do. This is my way of expressing myself in the field of art.Its not about the money, It's how you provide the needs of others using the talent that was given to you for free.  less

    adobe-photoshop adobe-illustrator illustration gui-design logo-design t-shirt-design cad-design 00 more less
    • $10.00 HOURLY RATE
    • 4.8
    • 1926 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 202 PORTFOLIO ITEMS
    • 8 TESTS
    GROUPS:
    ASSOCIATED WITH:
  • Licensed Interior Designer & Architectural visualizations Expert

    Hi, My name is Kristina Mihaylova and I am professional Interior Designer , graduated from Instituto Europeo di Design, Barcelona, Spain. Over the past five years, I have worked on a wide range of international interior design projects such as commercial … more

    Hi, My name is Kristina Mihaylova and I am professional Interior Designer , graduated from Instituto Europeo di Design, Barcelona, Spain. Over the past five years, I have worked on a wide range of international interior design projects such as commercial, residential, retail, office,low cost spaces, 2D floor plans and 3D elevations and renders, as well as on graphic, transportation and product design projects. I believe that design is a passion where the creativity is essential, but the hard work and real commitment are mandatory for a desirable outcome. I am able to work under pressure to tight deadlines and ensure the work is produced at the highest level and I would like a job where I could reveal my potential, challenge myself and where I can make a significant contribution to your company. Software Skills: Autodesk 3ds Max, V-Ray, AutoCAD, SketchUp Adobe Photoshop CS5, Illustrator CS5, InDesign CS5.5, Acrobat X Pro Thank you for your time.  less

    interior-design architectural-design visualization 3d-design 3d-modeling architectural-rendering autodesk-3d-studio-max 3d-rendering cad-design autodesk adobe-photoshop graphic-design 3d-animation presentations adobe-illustrator 00 more less
    • $25.00 HOURLY RATE
    • 4.9
    • 2125 HOURS
    • UNITED KINGDOM
    • LAST ACTIVE
    • 74 PORTFOLIO ITEMS
    • 4 TESTS
  • Architect | Illustrator | Cartoonist | Logo

    I am involved in architecture and graphic design work more than 10 years. I really loved my job. Even I feel this is a hobby. In 2011 I start moving as indepent architect under the banner of "Panca Pilar Architect … more

    I am involved in architecture and graphic design work more than 10 years. I really loved my job. Even I feel this is a hobby. In 2011 I start moving as indepent architect under the banner of "Panca Pilar Architect" which is engaged in the planning and design of the building architecture. This is my own company and have handled several local projects, particularly home and residential. Some commercial and educational buildings also has been ever handled by us. Besides, I do illustrations design as well. Designing logos, brochures, book covers, lay-out books, vektorize, freehand sketches, illustrations, comic strips and cartoon drawing is my favorite. I am an expert in the operation of softwares: - CorelDRAW (2D vector design) - Auto CAD (2D engineering drawings) - SketchUp (3D modeling) - Artlantis & Kerkythea (3D image rendering) - Photoshop (image manipulation) - Freehand Sketch I am strongly in maintaining client satisfaction and quality of work, as well as highly uphold honesty and mutual respect. I am glad to help you, and very ready whenever you need my services. Please contact me. Thank you.  less

    architectural-design 3d-modeling 3d-rendering 3d-design cad-design drafting corel-draw print-layout-design cartooning illustration logo-design 00 more less
    • $18.00 HOURLY RATE
    • 4.6
    • 2029 HOURS
    • INDONESIA
    • LAST ACTIVE
    • 71 PORTFOLIO ITEMS
    • 5 TESTS
  • ✓ Odesk Top Rank | Professional Graphic Designer & AutoCAD Connoisseur

    I am a freelance graphic designer over 5 years of experience in designing field. My objective is to get more and more experiences and serve you with my skills. Skilled and having experience in many application such Microsoft Office (Word … more

    I am a freelance graphic designer over 5 years of experience in designing field. My objective is to get more and more experiences and serve you with my skills. Skilled and having experience in many application such Microsoft Office (Word, Excel, Power Point), Professional Free-hand drawing, Web Designing, AutoCAD (2D and 3D modeling), 3ds Max, Solidworks, Photoworks, zbrush, etc., also Working in SEO to help your website got the best rank and traffic on major Search Engine. I will do my best to serve you and your firm.  less

    illustration solidworks autodesk autodesk-3d-studio-max adobe-photoshop adobe-illustrator microsoft-visio graphic-design corel-draw photography image-editing industrial-design cad-design 00 more less
    • $11.11 HOURLY RATE
    • 4.7
    • 1087 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 74 PORTFOLIO ITEMS
    • 9 TESTS
  • Product designer, Solidworks - AutoCAD design Engineer.

    MY PORTFOLIO HAS MANY MANUFACTURED PRODUCTS, AND NOT JUST FANCY DESIGNS. I would like to introduce myself as a meticulous and creative CAD designer, having an eye for detail. I can virtually conceptualize, design, if needed animate, and test everything … more

    MY PORTFOLIO HAS MANY MANUFACTURED PRODUCTS, AND NOT JUST FANCY DESIGNS. I would like to introduce myself as a meticulous and creative CAD designer, having an eye for detail. I can virtually conceptualize, design, if needed animate, and test everything in 3D, and then proceed to make detailed drawings for machining and manufacturing. My designs are elegant, yet practical and feasible to machine. My portfolio lists my designs and my prototypes. I also export my prototypes. I provide comprehensive solutions from concepts - design - prototyping - tooling - limited production runs. I have more than 10 years experience in Industrial design and manufacture of customized machinery (SPM's) for automobile spare parts OEM suppliers, sheet metal design, fabrication and assembly. I have a sheet metal prototyping unit. I work as a freelance designer - machinist - manufacturer. Also I act as the liaison between my clients and manufactures here in India. I offer the following services: 1. 3DModeling & Reverse engineering. 2. Concept drawings. 3. Product design & development. 4. Press & mold tool design. 5. General fabrications. 6. Sheet metal developments. 7. Component & Assembly drawings. 8. Prototyping & Manufacturing. 9. Component costing. 10. Rendering. 11. Virtual assistant (Engineering background) Thanks & Regards, David Kennedy. Keywords: 3d, 2d, Product designer, mechanical designer, model, modelling, reverse engineering, sheet metal, mold, plastic mold, dies, fixtures, assembly, assemblies, Solidworks, AutoCAD, drafting, drafter, specialist, fabrication, fabricator, product development, product engineering, product modeling, engineering, FEA, analysis, simulation, casting, structural engineering, cost analysis, welding, milling, CNC, press shop, press tool, pattern, laser cutting, CNC cutting, CNC milling,  less

    solidworks 3d-modeling cad-design product-development 3d-design concept-artistry machine-design industrial-design 00 more less
    • $30.00 HOURLY RATE
    • 4.6
    • 1215 HOURS
    • INDIA
    • LAST ACTIVE
    • 29 PORTFOLIO ITEMS
    • 5 TESTS
    ASSOCIATED WITH:
  • Architect , Expert 2D+3D Designer

    I've made a firm of architects. I am experienced in making 2d and 3d Architectural + Interior Design, and Graphic Design. Previously , I worked at the City Planning and Development Agency of Surabaya, Indonesia which underscored by the city government … more

    I've made a firm of architects. I am experienced in making 2d and 3d Architectural + Interior Design, and Graphic Design. Previously , I worked at the City Planning and Development Agency of Surabaya, Indonesia which underscored by the city government of Surabaya. as long as I get a lot of experience designing various kinds of buildings, such as: schools, government buildings, city parks, interior design, health centers, stall traders , etc.. I also have experience in designing storey house. To me ,designing a house is to think in detail how to harmonize the needs and wishes of the client, so I still consider how to achieve a healthy and modern houses. ============================================ SKILLS : -2D design -3D design -Architectural concept -Building concept design -Interior concept design -Architectural sketch -Interior sketch -Landscape design -Exihibition stand design / booth design -Sign design -Photorealistic rendering -Graphic design -Layout design ============================================ ============================================ SOFTWARE DESIGN : -Google Sketchup (2D & 3D Modelling) -Autodesk AutoCAD (2D & 3D Drawings), -Gimp (Graphic Arts and Photography like photoshop) -Adobe Photoshop (Graphic Arts and Photography) -Inkscape (vector base design like Corel Draw) -Corel Draw (vector base design) ============================================  less

    google-sketchup autodesk gimp inkscape adobe-photoshop corel-draw 3d-rendering 3d-design 3d-modeling interior-design architectural-design graphic-design landscape-design adobe-pdf pdf-conversion cad-design wire-framing architectural-rendering visualization trade-show-exhibition-design 00 more less
    • $17.00 HOURLY RATE
    • 4.9
    • 1243 HOURS
    • INDONESIA
    • LAST ACTIVE
    • 85 PORTFOLIO ITEMS
    • 5 TESTS
    GROUPS:
loading