Embedded C Freelancers

Showing 128 freelancers

Embedded C Freelancers

Showing 128 freelancers

Browse Embedded C job posts for project examples or post your job on oDesk for free!

Embedded C Job Cost Overview

Typical total cost of oDesk Embedded C projects based on completed and fixed-price jobs.

oDesk Embedded C Jobs Completed Quarterly

On average, 14 Embedded C projects are completed every quarter on oDesk.

14

Time to Complete oDesk Embedded C Jobs

Time needed to complete a Embedded C project on oDesk.

Average Embedded C Freelancer Feedback Score

Embedded C oDesk freelancers typically receive a client rating of 4.64.

4.64

Last updated: April 1, 2015

  • Programmer embedded systems

    I have large experiences for programming embedded systems. I use RTOS for my application and C,C++ language.

    embedded-c pcb-design 00 more less
    • $12.00 HOURLY RATE
    • 5.0
    • 0 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 0 TESTS
  • Hardware/Firmware engineer

    I'm passionate in Circuit Design and Firmware Development for Embeded System. I'd like to gain more knowledge and experiences while doing all sorts of embedded projects here in Odesk. SKILLS: - Software and Programming Languages: PCB layout EDA softwares … more

    I'm passionate in Circuit Design and Firmware Development for Embeded System. I'd like to gain more knowledge and experiences while doing all sorts of embedded projects here in Odesk. SKILLS: - Software and Programming Languages: PCB layout EDA softwares such as Altium Designer, Eagle Cad. - Simulation tools like LTSpice, MATLAB. - Experience in programming languages such as C, C++ and Python. Can also work with Objective-C, Java and Assembly. - Basic knowledge in iOS and Android programming. - Embedded system programming, firmware development. Familiar with RTOS system like FreeRTOS; common ‘maker’ systems like Arduino, Raspberry Pi; deeply embedded system like mbed from ARM. - Can work comfortably under Linux environment. Have experience working with GNU tools such as gcc, gcc-arm, makefile. - Experience working with Bluetooth 4.0, understand the protocol’s characteristics. Hardware: - Experience in designing schematic, PCB layout. Can read and understand components’ datasheets, reference manuals. - Experience in working with microcontrollers such as 8051, AVR, ARMs (STM32Fxxx, LPCxxx). Bluetooth SoC such as Nordic nRF51822 and TI CC2541. - ‘Maker’ platform such as Arduino, Raspberry Pi. - Common communication protocols such as UART, SPI, I2C, CAN, SWD. Have basic knowledge about USB protocol. Data acquisition such as ADC, DAC. - Experience in soldering electronic components (including through-hole and surface-mount components). Fluent usage of common lab equipment such as oscilloscope, logic analyzer.  less

    embedded-c embedded-systems arduino embedded-linux microcontroller-design bluetooth python 00 more less
    • $11.11 HOURLY RATE
    • 4.8
    • 0 HOURS
    • VIETNAM
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 3 TESTS
  • Firmware and Embedded Systems Developer

    Hello, I'm a firmware/embedded developer and consultant with over 6 years of professional experience. I was involved in firmware development and low level programming for x86, ARM and other architectures. I'm looking for challenging projects in area … more

    Hello, I'm a firmware/embedded developer and consultant with over 6 years of professional experience. I was involved in firmware development and low level programming for x86, ARM and other architectures. I'm looking for challenging projects in area of embedded systems, general purpose low level programming and reverse engineering. Areas of expertise: * Expert in BIOS/UEFI/EDK2/Tianocore framework * BSP development and integration (Buildroot, Crosstool-NG, U-Boot, Linux kernel, custom toolchains, GCC, GDB) * Internet of Things (IoT) consulting, design, development and integration, wire/wireless communication, protocols * PCB/breadboard prototyping Hands on experience: * CPU/MCU/SoC/PCH: * Intel microarchitecture: Sandy Bridge, Ivy Bridge, Haswell, Broadwell, Skylake * Intel PCH: Ibex Peak, Lynx Point, Sunrise Point, Patsburg, Wellsburg * BCM2835 (Raspberry Pi) * Allwinner A20 (Cubietruck) * ATmega328 (Arduino Duemilanove) * TI CC3100/CC3200 (LaunchPad) * TI CC2541 (SensorTag) * TI MSP430 (LaunchPad) * Amlogic S805 (Odroid C1) * Samsung Exynos 5 Octa (Odroid XU3) * NXP LPC13xx * Nordic NRF24L01 * Nordic NRF51822 * Espresify ESP8266 * Operating Systems development: * Linux * Android * FreeRTOS * TI-RTOS * Debugging: ACPI, PCI, USB, Storage (SATA, SAS, MMC/SD) * System emulation and simulation (Simics, QEMU, Virtualbox) * Embedded systems test automation  less

    embedded-linux embedded-c unix-shell python c driver-development microcontroller-programming arduino electronics embedded-systems 00 more less
    • $38.89 HOURLY RATE
    • 4.9
    • 112 HOURS
    • POLAND
    • LAST ACTIVE
    • 6 PORTFOLIO ITEMS
    • 5 TESTS
  • Embedded Systems Specialist

    I am an embedded systems engineer with over 6 years of experience in FPGA and embedded software design. I am proficient in VHDL, Verilog, C and C++ and have a very good knowledge of Xilinx and Altera EDA tools as … more

    I am an embedded systems engineer with over 6 years of experience in FPGA and embedded software design. I am proficient in VHDL, Verilog, C and C++ and have a very good knowledge of Xilinx and Altera EDA tools as well as an excellent experience in developing software on various embedded platforms. I also have a good experience in hardware design, namely schematics and PCB for digital systems.  less

    fpga vhdl verilog embedded-systems arduino xilinx embedded-c c++ 00 more less
    • $50.00 HOURLY RATE
    • 4.9
    • 0 HOURS
    • HONG KONG
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 6 TESTS
  • Electronic engineer. Embedded systems. MCU software. PCB developer.

    Great experience in programming for various types of microcontrollers (AVR, STM32 also MSP430, CC430, CC111X), using C as programming language. Work with different IDE's (AVR STUDIO, CodeVision AVR, IAR Embedded Workbench, WinAVR). There is >5 big and >15 personal … more

    Great experience in programming for various types of microcontrollers (AVR, STM32 also MSP430, CC430, CC111X), using C as programming language. Work with different IDE's (AVR STUDIO, CodeVision AVR, IAR Embedded Workbench, WinAVR). There is >5 big and >15 personal ready projects with my PCB design used. High skills level in modern Schematic & PCB Design Software (Altium Designer, DipTrace, Eagle and others). Several successfully ready projects with wireless RF connections: WI-FI, ISM. Ultra low power applications with batteries supply. Also used to work with industrial applications. Various sensors, networks, interfaces and protocols. RS485, RS232, CAN, MODBUS, SimplisiTi, Ethernet. Can carry out the whole project, starting from developing overall concepts, then schematic and PCB production (with prototype testing), ending with firmware for MCU and software for PC. Also have some skills in android development.  less

    pcb-design altium-desiger embedded-systems embedded-c 00 more less
    • $16.67 HOURLY RATE
    • 4.9
    • 534 HOURS
    • RUSSIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 6 TESTS
  • Mechatronics Engineering

    I am Mechatronics Engineering with master in Electronics and Computers Engineering, currently; I am a Ph.D. candidate in the Mechanical Computational Dept. of Mechanical Engineering at Campinas State University. Before I start my doctoral studies, I worked three years … more

    I am Mechatronics Engineering with master in Electronics and Computers Engineering, currently; I am a Ph.D. candidate in the Mechanical Computational Dept. of Mechanical Engineering at Campinas State University. Before I start my doctoral studies, I worked three years as a research assistant focus in motion control and embedded systems under Linux and parallel as adjunct professor in programming and control courses. Before that, I work two years in the industrial field (Military industry) and work in freelance mode in software development (PHP, c# .NET, java). http://www.linkedin.com/in/olmerg  less

    c++ php embedded-c embedded-linux python matlab c# mysql arduino microcontroller-programming solidworks labview multithreaded-programming socket-programming cnc-programming plc-programming 00 more less
    • $16.67 HOURLY RATE
    • 5.0
    • 0 HOURS
    • COLOMBIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • Embedded Software and Hardware designer

    Hello, I am M.Sc in EE with experience in embedded coding, specially with ARM Cortex M3/M4 microcontrollers and in hardware description using VHDL. Besides, I have an extensive experience in PCB design. I am seeking opportunities for develop … more

    Hello, I am M.Sc in EE with experience in embedded coding, specially with ARM Cortex M3/M4 microcontrollers and in hardware description using VHDL. Besides, I have an extensive experience in PCB design. I am seeking opportunities for develop challenging and interesting projects. I also have some experience in the following areas/devices: CAN Bus Bash Shell scripting Perl scripting Assembly Spice Microcontrollers: Arduino, PIC32 and MSP430 OpenGL Thanks, Javier Oliver.  less

    vhdl matlab pcb-design embedded-c pspice perl bash-shell-scripting 00 more less
    • $20.00 HOURLY RATE
    • 4.7
    • 36 HOURS
    • POLAND
    • LAST ACTIVE
    • 3 PORTFOLIO ITEMS
    • 1 TEST
  • English to Hindi Translator

    I am a student currently studying engineering, I come from an Army background so my English is flawless. Perfection is my ultimate goal. Why should you hire me? -I am a real go-getter and dedicated to my work. -I like … more

    I am a student currently studying engineering, I come from an Army background so my English is flawless. Perfection is my ultimate goal. Why should you hire me? -I am a real go-getter and dedicated to my work. -I like to search the in-depth meaning of words to give error free translation without losing their real sense. -I am readily available for communication. -My working hours are flexible. Apart from translation I have experience in field of programming. I have successfully programmed many micro-controllers including Arduino.  less

    borland-c++-builder embedded-c translation-hindi-english c c++ technical-documentation 00 more less
    • $3.00 HOURLY RATE
    • 5.0
    • 0 HOURS
    • INDIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 5 TESTS
  • Embedded Consultant

    Over the last 5 year, I have developed a wide range of embedded system, control systems and linux based applications. - I am familiar with - Embedded targets, such as PIC32, AMR7/9/11 based chip-sets including TI OMAP, Davinci, Sitara, Freescale … more

    Over the last 5 year, I have developed a wide range of embedded system, control systems and linux based applications. - I am familiar with - Embedded targets, such as PIC32, AMR7/9/11 based chip-sets including TI OMAP, Davinci, Sitara, Freescale i.MX. - I have worked on Audio, Video, SD card, i2c drives for embedded targets. - I can help you develop - Device driver (including Linux Device Driver) - Application - Boot-up & configuration scripts for embedded system - GUI application.  less

    embedded-linux assembly-language x86-assembler electronics embedded-c embedded-systems 00 more less
    • $33.33 HOURLY RATE
    • 4.7
    • 91 HOURS
    • INDIA
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 2 TESTS
  • C/C++/Embedded Software Developer

    Research & firmware development for networked, professional audio, control equipment for a last 5 years. Took part in more than 10 projects, from a quite small(1 month per project) to big once(3 years of total development); Main specialization it … more

    Research & firmware development for networked, professional audio, control equipment for a last 5 years. Took part in more than 10 projects, from a quite small(1 month per project) to big once(3 years of total development); Main specialization it's a low-level/middle-level software applications and environment for embedded systems in all of it lifetime: bootloaders, kernel, drivers, user-space applications; Experienced with most popular hardware platforms for embedded systems and PC: x86/64, M68K, MC56F, ARM, AVR, TMS320 via C/C++, STL, boost, posix; Network protocols knowledge (OSI, Ethernet, Sockets, IP/TCP/UDP, SNMP, RTP, Multicasting); Deep knowledge of embedded/peripheral bus interfaces, algorithms: SPI, I2C, USB, SMBUS, CAN, 1-wire, RS-232/485, I2S, TDM;  less

    embedded-c embedded-systems embedded-linux c++ driver-development java php qt mysql sqlite stl boost 00 more less
    • $27.78 HOURLY RATE
    • 5.0
    • 0 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 4 PORTFOLIO ITEMS
    • 3 TESTS
loading