HVAC System Design Professionals & Consultants

Showing 154 freelancers

HVAC System Design Professionals & Consultants

Showing 154 freelancers

Browse Hvac System Design job posts for project examples or post your job on oDesk for free!

Hvac System Design Job Cost Overview

Typical total cost of oDesk Hvac System Design projects based on completed and fixed-price jobs.

oDesk Hvac System Design Jobs Completed Quarterly

On average, 4 Hvac System Design projects are completed every quarter on oDesk.

4

Time to Complete oDesk Hvac System Design Jobs

Time needed to complete a Hvac System Design project on oDesk.

Average Hvac System Design Freelancer Feedback Score

Hvac System Design oDesk freelancers typically receive a client rating of 4.49.

4.49

Last updated: March 1, 2015

  • Renewable Energy and Energy Efficiency Engineer

    I am a Mechanical Engineer specialized in Renewable Energy Resources and Energy Efficiency in Buildings. I have good knowledge of solar thermal systems, heat pumps, wind energy and wind turbines, solar photovoltaics , HVAC systems, sustainable building design and building energy … more

    I am a Mechanical Engineer specialized in Renewable Energy Resources and Energy Efficiency in Buildings. I have good knowledge of solar thermal systems, heat pumps, wind energy and wind turbines, solar photovoltaics , HVAC systems, sustainable building design and building energy simulation and performance. I am familiar with AutoCAD, Revit\Revit MEP, SketchUp, IES VE , Vasari, PVSYST, PV*Sol, T*Sol, Windographer, and WindSim. I can provide services in renewable energy such as solar PV design,solar thermal systems for hot water use and wind resource assessment.Also I am capablle in buildings services such as HVAC systems, building energy modelling and audits and sustainable building design.  less

    autodesk-revit google-sketchup microsoft-excel-powerpivot microsoft-word energy-engineering sustainable-energy wind-power-consulting hvac-system-design 00 more less
    • $12.22 HOURLY RATE
    • 5.0
    • 8 HOURS
    • GREECE
    • LAST ACTIVE
    • 3 PORTFOLIO ITEMS
    • 1 TEST
  • HVAC Engineer, Drafter

    I am professional HVAC engineer and working in this field for 4 years, so I know all the future aspects and issues which can arise during engineer process. I have great experience working with water and sewerage systems of gasoline … more

    I am professional HVAC engineer and working in this field for 4 years, so I know all the future aspects and issues which can arise during engineer process. I have great experience working with water and sewerage systems of gasoline stations, hotels, resorts, apartments, family houses, to name a few. Also I should say that I'm a certified AutoCAD user so you can be assured in my qualification. I can easily complete different projects, create blueprints and even redraw drawings from pdf or different hand-drawn drawings to CAD format. Also I have some experience of translating texts from English to Ukrainian or Russian and conversly, from Ukrainian and Russian to English. In addition I must say, that I'm extremely proficient pc user. I'm perfectly working with all of new software which is needed for my work. I will be perfect employee which meets the requirements of price and quality. If you interested in my candidacy I'm always available on skype (yura.malna) or e-mail (yura.malna@gmail.com).  less

    contract-drafting drafting graphic-design adobe-photoshop 3d-modeling autocad engineering-drawing cad-design translation hvac-system-design 00 more less
    • $7.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 4 PORTFOLIO ITEMS
    • 5 TESTS
  • Mechanical engineer, CAD specialist and 3d designer

    Hello all, please, feel free to visit my page athttp://austervindsel.deviantart.com/gallery/29436721/3D as it may already have 3d models you are looking for! My name is Andreas, I am design engineer, working as one since graduation … more

    Hello all, please, feel free to visit my page athttp://austervindsel.deviantart.com/gallery/29436721/3D as it may already have 3d models you are looking for! My name is Andreas, I am design engineer, working as one since graduation from National University of Shipbuilding (Nikolaev, Ukraine) in 2010. I was involved in designing lots products (marine-use mostly) such as air dumpers, air diffusers, air grilles, valves, canopies, heaters, fan-coils, and fireproof structures. In 2012 I launched my career as a freelance 3d designer, making models of buildings, constructions, vehicles, jewellery, mechanical parts and many others. My work consists of: 1) Creation of 3d model (part or assembly of any size and difficulty); 2) Making from this model all necessary drawings and specifications; 3) Creating models for 3d printing. My specializations are: 1) 3d modelling (Solidworks, Sketchup); 2) Creative 3d modelling (Maya, 3d Max) 3) Mechanical engineering; 4) Manufacture-orientated drawings (Solidworks, AutoCAD);  less

    mechanical-engineering hvac-system-design 3d-design solidworks autodesk-maya autodesk google-sketchup engineering-drawing abaqus translation-english-russian 00 more less
    • $9.00 HOURLY RATE
    • 4.9
    • 127 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 15 PORTFOLIO ITEMS
    • 14 TESTS
  • Assoc. Prof. PhD

    Title of qualification awarded: 1. Civil Engineer on Heat, Gas Supply and Ventilation Principal subjects: Heat supply, Gas supply, HVAC 2. Master’s Degree on Water Supply and Water Disposal Principal subjects: Intensifying and Reconstruction of Water Supply and Disposal … more

    Title of qualification awarded: 1. Civil Engineer on Heat, Gas Supply and Ventilation Principal subjects: Heat supply, Gas supply, HVAC 2. Master’s Degree on Water Supply and Water Disposal Principal subjects: Intensifying and Reconstruction of Water Supply and Disposal Systems, Theoretical Grounds for Water and Wastewater Treatment on Industrial Enterprises, Equipment and Operation of Water Supply and Disposal Systems, Informational Technologies in Scientific Researches, Intellectual Property Good command of Microsoft Office, Autodesk tools (Revit, Inventor, AutoCad and other) Corel tools, Solidworks, Maple and other  less

    hvac-system-design autodesk-inventor autodesk-revit revit-architecture autodesk corel-draw libreoffice adobe-photoshop maple 00 more less
    • $22.22 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • UKRAINE
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 1 TEST
  • HVAC/R technical writer and application specialist

    Close control business developer G.I.Industrial Holding Spa gennaio 2010 – Presente (4 anni 8 mesi)Rivignano A holding Group acquired the brand and logo of the Company for which I worked from 99 to 2007. The holding group already … more

    Close control business developer G.I.Industrial Holding Spa gennaio 2010 – Presente (4 anni 8 mesi)Rivignano A holding Group acquired the brand and logo of the Company for which I worked from 99 to 2007. The holding group already owned three brands in the HVAC and process cooling sector. I was hired for the following objectives: • Market brand reintroduction in the existing sales network. • Completion and redesign of the precision air conditioning product range. • Training of national and international sales and aftersales network. • Technical update and development. • Clients, sales, distributors and dealers management. Technical support on 4 continents, in 50 countries of the world. • Feasibility and problem solving analysis. • Cost analysis and technical-commercial offer; While hired, updating and education continued on Data Centres and Telecommunication HVAC subjects (see attachments). I qualified as Six Sigma White Belt Customer Satisfaction Engineer Frascold Spa gennaio 2008 – gennaio 2010 (2 anni 1 mese)Rescaldina Frascold Spa After the company stopped the operations, together with a colleague of mine I’m hired to a supplier, producer of semi-hermetic reciprocating and twin screw compressors for refrigeration. We created a new after sales structure called “Customer Satisfaction dept.”. My duties at the time are summarized as follows: • On site commissioning; electric, refrigerating and mechanical maintenance • On site data recording and collection; diagnostics. • Spare parts management. • Feasibility analysis with HVAC/R consultants. • Returned material inspection. • Claims reporting. • Editing and translation of manuals. • Editing and publishing of newsletters, updates, surveys, etc. • I also take care of preparing MS PowerPoint slides presentations for the frequent Sales Meeting and Technical Seminars to engineers and/or potential customers. I supervise two hierarchically subordinated men of the repair workshop. Sales Support Engineer Assistance and Application Specialist Montair srl settembre 1999 – agosto 2007 (8 anni)Garbagnate M.ro Montair srl Worked in a young company, in good and fast market expansion, operating in the refrigeration and HVAC sector. The company was looking for its third designer. After few contacts, they submitted an interesting proposal for becoming a Sales Support Engineer, thanking to my optimal knowledge of English, my broad relational skill and my previous designing experience. My responsibilities were summarised, but not limited to: • Customers, agents, resellers and dealers relationship and contacts, pre- and after- sale, in the following regions: Europe, including Russian Federation, Middle east, North Africa, Far East (EMEA, Hong Kong, Singapore, China); • Feasibility analysis and customer oriented problem solving; • Techno-commercial offers and quotations; • Cooperation with Marketing for highlighting and improvement of product features; • Texts submissions; supervision to editing and printing of papery brochures and leaflets; translation to/from English and Italian; • Markets analysis (telecommunications, industry, etc.) • Visits to customers, agents, resellers and dealers at a paneuropean level; From September 2003, after an internal reorganisation, considering my past technical experience, I’ve been promoted “Assistance and Application Specialist”. I took care of: • On site interventions commissioning and set-ups of microprocessors and working parameters. • Electrical and electronic routinely maintenance. Fault analysis • Programming and developing of firmware in Carel Easytools for 80x52 microcontrollers and Soft!Comfort for PLC Logo! Siemens series. • Overview on site before and after installation, cooperation with mechanical contractors. • Spare parts management. • OEM market analysis and new products verification. • Close control and chiller units’ algorithms. • Feasibility analysis with HVAC/R consultants • Editing and translation of user and installation manuals. From January 2004, I supervised two field service engineers.  less

    italian translation-english-italian translation-italian-english technical-writing pdf-conversion technical-support technical-editing technical-documentation hvac-system-design industrial-engineering 00 more less
    • $11.11 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • ITALY
    • LAST ACTIVE
    • 0 PORTFOLIO ITEMS
    • 9 TESTS
  • CAD Drafter/3D Modeler/Architectural Designer

    Aim to utilize my expertise as a CAD Draftsman in the architectural industry, where I could project my accurate illustrations in simple and presentable manner, thereby adding to the growth of the organization. CAREER SUMMARY: - 6 year working experience as … more

    Aim to utilize my expertise as a CAD Draftsman in the architectural industry, where I could project my accurate illustrations in simple and presentable manner, thereby adding to the growth of the organization. CAREER SUMMARY: - 6 year working experience as the Auto CAD Draftsman - Good knowledge of constructions and designing. - Working knowledge of Autocad, Chief Architect and Sketch up - Ability to design architectural documents and illustrations. - Working knowledge of photographic technics and graphic representation. - Proficient with amending and improving the blueprints. - Ensure the safety and security of the base plan. - Ability to evaluate the reliability and the quality of the designs. - Believer of team work, with experience of handling the team of fresher during the course of training. MY SERVICES INCLUDES: *3D modeling and product design *2D and 3D shop drawings *PDF to CAD file conversions *landscape and site plans *architectural plan and design *structural plan and design *mechanical/electrical/HVAC plans  less

    autocad solidworks 3d-modeling architectural-design architectural-rendering structural-engineering google-sketchup plumbing electrical-drawing hvac-system-design 00 more less
    • $8.00 HOURLY RATE
    • 5.0
    • 314 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 6 PORTFOLIO ITEMS
    • 4 TESTS
  • HVAC System Designer

    I have 14 years experience in the HVAC Industry which includes work throughout the United States of America and the Bahamas. I have the ability to provide full Heat Load Calculations(HVAC System Design), Duct Layouts, & cost estimating for both … more

    I have 14 years experience in the HVAC Industry which includes work throughout the United States of America and the Bahamas. I have the ability to provide full Heat Load Calculations(HVAC System Design), Duct Layouts, & cost estimating for both Residential & Commercial work.  less

    hvac-system-design drafting 00 more less
    • $27.78 HOURLY RATE
    • 5.0
    • 15 HOURS
    • UNITED STATES
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 7 TESTS
  • Design and Development Engineer(Mech), Excel Researcher

    I have more than 7 years of work experience in the field of mechanical engineering such as refrigeration and airconditioning, power plant engineering, thermodynamics etc.. As such, I am knowledgeable on various CAD softwares like Ansys, Inventer, Autocad etc. I … more

    I have more than 7 years of work experience in the field of mechanical engineering such as refrigeration and airconditioning, power plant engineering, thermodynamics etc.. As such, I am knowledgeable on various CAD softwares like Ansys, Inventer, Autocad etc. I am also proficient in using Word, Excel and Powerpoint. You can reach me through Skype. I guarantee prompt reply your communications and my work perfectly created.  less

    mechanical-engineering hvac-system-design cad-design manufacturing-design machine-design 00 more less
    • $5.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • INDIA
    • LAST ACTIVE
    • 1 PORTFOLIO ITEM
    • 3 TESTS
  • Design & Mechanical Engineer

    My background has involved a diversity in of engineering projects, especially those in mechanical engineering field. Professionally, I enjoy working on challenging projects that push excellence to higher levels. Professional development is manifested by graduate level education and expanding skills … more

    My background has involved a diversity in of engineering projects, especially those in mechanical engineering field. Professionally, I enjoy working on challenging projects that push excellence to higher levels. Professional development is manifested by graduate level education and expanding skills and qualifications through experience and certification. My master's degree in Engineering Management will be completed from California State University, Northridge (CSUN) in December 2014. Please see the "Certifications" section to see my accomplishments. I am currently working as a Quality Manufacturing Engineer at Matech GSM. This role focuses on helping to scale up R&D operations into larger scale production through process mapping and applying the DMAIC tools of Six Sigma. I am also working on building a Quality Management System to allow for full insertion of Matech products into current prime contract programs. Previously, I worked as a Facility Engineer at Weber Metals. This role has a wide range of responsibilities such as minor building & grounds repairs, environmental compliance, managing contractors, and the planning/proposal/execution of major expense projects and capital acquisition projects. Examples of my major projects can be seen in the "Projects" section of this site. I have had two other full-time jobs since completing my bachelor’s degree. Prior to working at Weber Metals, I worked as a mechanical engineer and project manager at ASC Process Systems, designing and building industrial composite curing autoclaves and ovens. Work at Western Air Limbach incorporated a rotational training program known as Limbach Engineering Management Trainee (LEMT). The program began with work as an estimator, reviewing a wide variety of HVAC systems including drawings and specifications. The second phase of the program was working as a project engineer. Training in formal project management skills was the focus of this phase. Project management aspects included performing cost estimates (for change orders), RFI & submittal tracking, and other various project control tasks. I had two internships while attending USC. The first internship was working at Black & Veatch working as an engineering intern, supporting civil design engineers. The summer going into my senior year, I worked for LADWP as a student engineer working under the general construction portion of the electrical side, assisting in project management roles. Teaming up with my father and uncle, we have developed a concept for an automatic tire inflation system (ATIS). We had filed for the patent in October of 2010 and granted the patent in July 2013. My role was in the engineering of the system. I have also prepared the sales/martketing material (such as sales presentation and spearheading the sales video efforts) as we work towards licensing agreements.  less

    mechanical-engineering engineering-drawing cad-design engineering-design hvac-system-design industrial-engineering reverse-engineering model-sheet-drawing model-sheet-design 00 more less
    • $30.00 HOURLY RATE
    • NO FEEDBACK GIVEN
    • 0 HOURS
    • UNITED STATES
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 0 TESTS
  • hvac,plumbing,fire fighting designer

    Eleven years of professional experience as a Senior HVAC, plumbing and fire fighting designer, I possess the skills to take a HVAC design project from conception to completion, proficient in the use of HVAC design software, AutoCAD and many other … more

    Eleven years of professional experience as a Senior HVAC, plumbing and fire fighting designer, I possess the skills to take a HVAC design project from conception to completion, proficient in the use of HVAC design software, AutoCAD and many other software packages. I possess specific skills in ; Site investigation and inspection, cost estimating, budget creation, thermal load estimating, exhaust fan sizing, hydronic piping layout and sizing, diffuser layout, duct layout and sizing, equipment layout, static pressure calculations, equipment selection and specifications, pump sizing for hydronic systems, red-line creation and vendor drawing review .  less

    hvac-system-design plumbing fire-protection-engineering autodesk pdf-conversion 2d-design adobe-photoshop microsoft-excel microsoft-word 00 more less
    • $16.67 HOURLY RATE
    • 4.9
    • 11 HOURS
    • TUNISIA
    • LAST ACTIVE
    • 2 PORTFOLIO ITEMS
    • 3 TESTS
    ASSOCIATED WITH:
loading