Mechanical Engineering Professionals & Consultants

Showing 18 freelancers

Mechanical Engineering Professionals & Consultants

Showing 18 freelancers

  • Mechanical Design Engineer

    Over the last 13 years, I have been working primarily on product design and development of consumer products. When I say " I have been working..", I am directly involved on every process of the product development as follows : 1. Concept … more

    Over the last 13 years, I have been working primarily on product design and development of consumer products. When I say " I have been working..", I am directly involved on every process of the product development as follows : 1. Concept generation / Brain storming 2. Engineering design 3. Rapid prototyping (CNC, SLA, SLS, FDM, objet), prototype assembly and prototype evaluation 4. Design adjustments (if needed) based on the prototype 5. Mold meeting / Mold design approval 6. First article inspection 7. Parts approval during injection / Parts approval for non-injected parts 8. Mass production supervision I am also familiar with different manufacturing processes like metal stamping, ultrasonic welding, blow molding, compression molding and extrusion (both metal and plastic). With all the knowledge and exposures that I have acquired, I would say that I am not contractor by the "drawing board" only but a contractor who can deliver any consumer product to the market.  less

    mechanical-engineering product-management 3d-modeling proe industrial-design cad-design engineering-drawing project-management 00 more less
    • $38.89 HOURLY RATE
    • 4.6
    • 1060 HOURS
    • PHILIPPINES
    • LAST ACTIVE
    • 6 PORTFOLIO ITEMS
    • 4 TESTS
  • Senior Project Manager/Product Developer

    I have a comprehensive background in product development/project management within the confines of international medical device regulations. I thrive on taking vague ideas and ill-defined needs and turning them into concrete reality. I can start a medical device company … more

    I have a comprehensive background in product development/project management within the confines of international medical device regulations. I thrive on taking vague ideas and ill-defined needs and turning them into concrete reality. I can start a medical device company from the ground up and I can do it on schedule. This includes... From a Regulatory perspective: --Initial regulatory requirements analysis for new markets (EU, Brazil, Australia, US, Canada, etc.) --Identification of applicable test protocols (ISO standards, etc.) and management of test houses --Interfacing with regulatory agencies and identifying consultants --Writing of regulatory submissions such as FDA 510(k)s --Quality System development and implementation to required standards (ISO 13485, FDA, CMDCAS, etc.) --Identification of loop holes and temporary workarounds to ease implementation pains and maintain profitability From a Project perspective: --Using good interpersonal skills to keep people motivated and excited --"Conducting the orchestra", developing a logical rhythm of events and ensuring timely completion of tasks --Turning "unknown unknowns" into "known unknowns", forseeing problems before they arise and altering the "orchestra" accordingly --Coordination of teams on an international level --Intelligently focusing energy on tasks with the highest variability, including procurement of additional expertise as necessary --Always keeping an open dialog about the day-to-day changes in the "Good/Fast/Cheap, pick any two but only two of the three" trade-offs in milestone achievement From a Product perspective: --Development of design parameters from organization input (Sales, Marketing, Support, etc.) --Nitty-gritty technical work like engineering drawings/drafting, statistical analysis, resdesigns due to manufacturing constraints, component supplier identification. --Identification, qualification, and day-to-day management of international manufacturers --Design History File/Technical File development and maintenance --Design Transfer for complex electromechanical devices From an Operations perspective: --Part Number/Drawing Number/Revision Control development and implementation --Engineering Change Order workflow and impacts --Purchasing-Manufacturing-Sales-Shipment procedures and throughput --ERP/MRP implementation including workarounds for system limitations I am a strong believer in a person's word. If I tell you I'm going to do something by a certain date that is my word and I'm going to get it done, hell or high-water. I don't mess around: I live on a remote homestead so I grow my own food, build my own structures, fix my own car, brew my own beer. My entire life requires a high level of precision execution every single day, failure is not an option.  less

    project-management solidworks product-development cad-design medical-imaging drafting engineering-drawing chemical-engineering mechanical-engineering reverse-engineering 00 more less
    • $38.89 HOURLY RATE
    • 5.0
    • 1374 HOURS
    • UNITED STATES
    • LAST ACTIVE
    • 10 PORTFOLIO ITEMS
    • 1 TEST
  • Mechanical Engineer | Product Designer | FEA | CFD | SolidWorks | CAD

    My name is Arfi'an Fuadi. I have 9+ years of professional experience with Mechanical Engineering, CAD, Product Development, Manufacturing Processes, FEA, and CFD. This is my 5th year in oDesk with 4,500++ oDesk hours (and counting) with an … more

    My name is Arfi'an Fuadi. I have 9+ years of professional experience with Mechanical Engineering, CAD, Product Development, Manufacturing Processes, FEA, and CFD. This is my 5th year in oDesk with 4,500++ oDesk hours (and counting) with an overall customer satisfaction rating of 4.98 (out of 5.0). With all of my experience and expertise I always committed to providing efficient and extremely high-quality design work, prompt communication, and detailed documentation for all my clients, no matter how large or small the project. I work tirelessly as my aim is to provide the best design & engineering service in the industry. My presently offered services include the following: 1. Mechanical Engineering services : - 3D CAD mechanical design - Reverse Engineering - FEA (finite element analysis) - 2D shop drawing (for manufacturing / prototyping) - 3D rendering picture / animation (for presentation / marketing purposes) - Design development - Design calculation - Contact manufacturing. 2. Consumer Product Design - 3D CAD product design - Design development - Complex surfacing design - Plastic enclosure design / development - 3D photo realistic rendering picture / animation (for marketing / presentation purposes) - Rapid prototyping (3D Printing / CNC Machining) - Contact manufacturing (Injection Molding, CNC Machining) 3. Reverse Engineering & 3D Conversion - 3D CAD design / development based on photgraph - 3D CAD design / development based on hand sketch / drawing - 3D CAD design / development based on description & sample picture - 3D CAD design / development based on 3D Scan 4. Sheet Metal Design - 3D complex sheet metal design - Design development - 2D shop drawing - 2D flat pattern drawing (for laser cutting) - FEA (Finite Element Analysis) - Contact manufacturing.  less

    mechanical-engineering structural-engineering solidworks autodesk-inventor autodesk product-development 3d-rendering 3d-animation 00 more less
    • $15.00 HOURLY RATE
    • 5.0
    • 4776 HOURS
    • INDONESIA
    • LAST ACTIVE
    • 9 PORTFOLIO ITEMS
    • 7 TESTS
  • SolidWorks, Mechanical Design Engineer,AutoCAD 2D,3D, Animator

    I am a Mechanical Engineer with lot of experience in Mechanical Design. I have a complete set of skills that are required in a perfect mechanical design engineer. I have experience in using most of the latest engineering software like … more

    I am a Mechanical Engineer with lot of experience in Mechanical Design. I have a complete set of skills that are required in a perfect mechanical design engineer. I have experience in using most of the latest engineering software like Solidworks 2013. AutoCAD 2013. (TOP 10) Google Sketchup Pro 2013 And I provide the following Services 2D Drawing (all type) 3D Modeling, Rendering, Animation 3D Printing Design (STL,VRML) Design & Development of products Stress Analysis Material Estimation (BOM) And many more..............  less

    mechanical-engineering solidworks autodesk google-sketchup product-development engineering-drawing 3d-design 3d-modeling animation 3d-rendering 00 more less
    • $15.00 HOURLY RATE
    • 4.8
    • 1802 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 21 PORTFOLIO ITEMS
    • 4 TESTS
  • Inventor, Solidwork, CAD Engineer and Drafting

    With ++5000 hours odesk job and 10 years as mechanical and structural Design Draftsman. I have experience in Technical design for Manufacturing industry, HVAC and Clean room system, Bulk material handling, Mining Industries, Piping, Sheet metal, Structural / Infrastructure facilities. - 2D … more

    With ++5000 hours odesk job and 10 years as mechanical and structural Design Draftsman. I have experience in Technical design for Manufacturing industry, HVAC and Clean room system, Bulk material handling, Mining Industries, Piping, Sheet metal, Structural / Infrastructure facilities. - 2D & 3D Modeling and Design. - Redraw drawing from pdf, tif, hand sketch. - Details Drawing, - Mechanical Simulation and Stress Analysis (FEM / FEA). - Dynamic simulation Using autodesk Inventor - 3D Rendering and overview product or 3D walktrough. - 3D Modeling and Technical Drawing, * Provide Detail Drawing for manufacture. * Assembly Drawing. * Explode drawing. * Bill of Material part for manufacturing. - Sheet Metal Work * 3D modeling sheet metal * Create Flat Pattern sheet metal * Blank Analysis from drawing or forming process. * 2D Sheetmetal drawing for manufacture or for Laser Cut Software in use: Autodesk Inventor / Solidwork / Auto Cad  less

    autodesk-inventor solidworks engineering-drawing product-development autodesk google-sketchup 3d-rendering mechanical-engineering reverse-engineering 3d-design 00 more less
    • $12.50 HOURLY RATE
    • 4.9
    • 6172 HOURS
    • INDONESIA
    • LAST ACTIVE
    • 11 PORTFOLIO ITEMS
    • 5 TESTS
  • Engineering design & development, content writing & teaching(Retired )

    I am a retired mechanical engineer. I want to spend some time in working & at the same earning some money . I have worked in :- 1.0 MACHINE DESIGN:-, 1.1. Machine tools 1.2. Hydraulic machines, 1.3. Hydraulic presses … more

    I am a retired mechanical engineer. I want to spend some time in working & at the same earning some money . I have worked in :- 1.0 MACHINE DESIGN:-, 1.1. Machine tools 1.2. Hydraulic machines, 1.3. Hydraulic presses, 1.4. SPM (Special purpose machines) 1.5 Medical Equipment:- 1.5.1 Canister design 1.5.2 Circle breathing systems 1.5.3 Flow meter 1.5.4 Gas mixing systems 1.5.5 Vaporizer 1.5.6 Ventilator. 2. SYSTEM DESIGN: 2.1 HVAC - Buildings, Commercial & Residential 2.2 MEP : Buildings, Commercial & Residential 3.0 R&D,(RESEARCH & DEVELOPMENT) & PRODUCT DEVELOPMENT 3.1 Machine tool : 3.2 SPM 4.0 INDUSTRIAL ENGINEERING:- 4.1 Time & Motion Study 4.2 Time Estimate of manufacturing products. 4.3 Process Planning 4.4 Product planning 4.5 Engineering costing. 5. 0 Production Shop, 5.1 Precision machine shop 5.2 Heavy duty machine shop 5.3 Gear shop (Gear manufacturing machine shop) 6.0 MARKETING:- 6.1 As a service engineer 6.2 As a sales engineer 6.3 As a business development engineer. 7.0 PROFICIENCY IN SOFT WARES:- 7.1 2D Cad- Engineering drawings. ( Since a 15 years.) 7.2 Microsoft Word (From 20 Years) 7.3 Microsoft Excel (From past 20 Years) 7.4 Dbase & Foxpro 7.5 3D Modeling Engineering drawings (From past 10 Years) I have more than 25 Years of experience in engineering industries, manufacturing, Design & product development:- Machinetools, Fluid power industries, process industries, Pumps & Valves, SPM's (Special purpose machines), Hydraulic presses, Material handling equipment and many more:  less

    3d-modeling microsoft-excel mechanical-engineering teaching-physics teaching-mathematics structural-engineering machine-design industrial-engineering spm-design engineering-drawing 00 more less
    • $6.67 HOURLY RATE
    • 4.5
    • 2129 HOURS
    • INDIA
    • LAST ACTIVE
    • 8 PORTFOLIO ITEMS
    • 13 TESTS
  • Magnus Engineering - Mechanical Engineering and Design Services

    20+ years experience on: - mechanical engineering - industrial design - structural engineering and steel detailing Services provided: - Conceptual and detailed design - 3D modelling - Mechanical FEM analysis - Manufacturing drawings and customized reports. - Images rendering and video animations for advertising purposes Applications used: - SolidWorks and Inventor - AutoCAD - Tekla Structures and SAP 2000 - Blender

    mechanical-engineering solidworks structural-engineering autodesk tekla-structures autodesk-inventor industrial-engineering industrial-design engineering-drawing blender3d sap-2000 3d-design 3d-modeling 3d-animation 00 more less
    • $15.00 HOURLY RATE
    • 4.6
    • 5235 HOURS
    • ROMANIA
    • LAST ACTIVE
    • 13 PORTFOLIO ITEMS
    • 9 TESTS
    ASSOCIATED WITH:
  • Senior Licenced Mechanical Design Engineer-Solidworks-DFMA-CAD-CAE-CFD

    Licenced Mechanical Engineer having over thirty years of experience within design development and manufacturing industry, and over 2.5 K oDesk hours (including fixed price projects) developing, designing, and manufacturing complex parts and systems. For my developments i am using … more

    Licenced Mechanical Engineer having over thirty years of experience within design development and manufacturing industry, and over 2.5 K oDesk hours (including fixed price projects) developing, designing, and manufacturing complex parts and systems. For my developments i am using Solidworks, Autodesk Inventor, Rhino 3d, 3dSMax, Autocad, Autodesk Algor Multiphysics and Autodesk Moldflow combined with a lot of conceptual sketches being done using the traditional pencil and paper method. Whatever your need is, from a simple part towards a complete machine, a new product, a complicated sheet metal design ,an ipod-ipad or tablet peripheral device, the reverse engineering of an existing product, or just the 3d modeling and rendering of any design,the conversion of your old 2d drawings to 3d, FEM, CFD or Engineering calculations, you could rely on my expertise. I am proud for my fast, responsible, faithful and reliable service which assorted with highly responsible communication with my customers, is always oriented towards assisting you in everything related with your 3D modeling, engineering development and simulation - engineering calculation needs. I am also proud for the fact, a lot of my designs are currently being fabricated,erected and operate, throughout the world, from U.S.A and Canada up to India, China, Australia and New Zealand including also UK, Belgium, Italy and Denmark. So apart from my pure development and design duties, i am currently also having an active participation with the supervision of these fabrications worlwide. With a vision towards offering integrated services to my customers, my agency could undertake the full physical prototype development of your product under a separate financial agreement.  less

    mechanical-engineering solidworks autodesk industrial-design jig-and-fixture-design industrial-engineering engineering-drawing autodesk-inventor reverse-engineering autodesk-revit 3d-rendering rhinoceros-3d autodesk-3d-studio-max autodesk-navisworks microsoft-visio microsoft-access microsoft-excel microsoft-powerpoint 00 more less
    • $30.00 HOURLY RATE
    • 4.8
    • 2189 HOURS
    • GREECE
    • LAST ACTIVE
    • 22 PORTFOLIO ITEMS
    • 9 TESTS
    ASSOCIATED WITH:
  • CAD CAE CFD expert

    3K hours and counting, among the top 5% freelancers on oDesk more than 100 successfully completed projects on oDesk, some quick, couple hours, and some with 100+ hours, it's a prove of the quality of my work... So if … more

    3K hours and counting, among the top 5% freelancers on oDesk more than 100 successfully completed projects on oDesk, some quick, couple hours, and some with 100+ hours, it's a prove of the quality of my work... So if you really want your project done with top quality, no false results, engineering approach, hire me and leave the rest to a professional. I'm proficient in various CAD systems and types of metal work, sheet metal, moulds, milling... plastic parts I have more that 10 years of FEA / CFD experience with various packages SolidWorks, ALGOR, ANSYS, Autodesk, Simulation.. I know how to set up the simulation to get the real valid results, and using that information to optimise the product to meet the demands More than 15 years experience in industry, pumps, construction, automotive, costumer products, 3D printing, reverse engineering, medical devices, plastic parts, sheet metal, product optimisation, FEA structure optimisation, shape optimisation for manufacturing, injection moulding, EXCEL driven 3D parametric modelling.... working experience in MCI-Skopje mechanical engineer Makfluid - Skopje mechanical engineer CAD/CAE/CFD MZT Pumpi - Skopje mechanical engineer CAD/CAE/CFD EIN-SOF Skopje Senior Engineer Jonh Deere - Germany mechanical engineer RITZ - Germany mechanical engineer CAD/CAE consultant ATURIA - Italy mechanical engineer CAD/CAE consultant CATIA, Solid Works, Solid Edge, CREO, Pro Engineer, NX, ANSYS, Inventor, AutoCAD ... CAD Drafting, 3D modelling, CAE calculations, CFD calculations, product optimisation, 2D to 3D conversion, reverse engineering (damaged product to 3D/2D documentation .... some of my work can be seen here www.DreamTech.con.mk  less

    solidworks solid-edge catia autodesk-inventor ansys autodesk cad-design drafting 3d-modeling siemens-nx google-sketchup 3d-design 3d-rendering 3d-printing automotive-engineering proe mechanical-engineering 00 more less
    • $27.78 HOURLY RATE
    • 4.8
    • 3733 HOURS
    • MACEDONIA
    • LAST ACTIVE
    • 76 PORTFOLIO ITEMS
    • 6 TESTS
    ASSOCIATED WITH:
  • CAD, Graphic designer, Virtual assitant,

    Hello to every one. I am passionate about enhancing my skills all the time. I have worked here for more than 2 years. I always care for what I deal and this is simply a key for any freelancer. I … more

    Hello to every one. I am passionate about enhancing my skills all the time. I have worked here for more than 2 years. I always care for what I deal and this is simply a key for any freelancer. I have experience in following categories - CAD: 2 year experience - adobe Photoshop: 3 year experience - Solid works: I am new in this but not dummy - Mechanical Engineering - along with these I have worked as an assistant for many clients here.  less

    cad-design mechanical-engineering autodesk data-entry virtual-assistant image-editing google-docs email-marketing 00 more less
    • $2.22 HOURLY RATE
    • 5.0
    • 1989 HOURS
    • PAKISTAN
    • LAST ACTIVE
    • 11 PORTFOLIO ITEMS
    • 6 TESTS
loading